Abstract:Aiming to obtain a martensite-free microstructure of Ti–Zr alloys with a combination of enhanced deformability and improved mechanical properties for dental application, two high Zr-containing Ti-based alloys were prepared with commercially pure titanium as a control. The effects of Zr addition on the deformation mechanism, microstructure and mechanical properties were investigated. After thermo-mechanical processing and cold deformation, samples were characterized using Vickers microhardness, tensile tests, X-ray diffraction (XRD) scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The XRD and TEM examinations revealed that the increasing Zr addition suppressed the deformation twining and favored the deformation-induced face-centered cubic (FCC) phase, the corresponding reason was discussed. There is a competition between the deformation twin and FCC phase. The two types of FCC phase were simultaneously found with orientation relationships (ORs) of Basal-type: <11–20>HCP//<110>FCC and {0001}HCP//{111}FCC and Prismatic-type: <0001>HCP//<001>FCC and {10-10}HCP//{110}FCC. This phase transformation enhanced the deformability during processing. As the Zr addition increased, the microhardness, mechanical strength and plasticity are increased concurrently. The interactions of twins were found to cause brittle fracture of Ti20Zr alloy. Based on the texture analysis, the activated slip systems of FCC phase were determined via calculating the Schmid factor. The FCC phase not only provided additional slip systems but also impeded dislocation slip effectively, improving the strength-plasticity of Ti30Zr alloy. The findings will provide a novel approach associated with the strengthening-toughening mechanism of metallic materials.

The Influence of Zirconium on the Crystallization Behavior and Electrical Properties of Cr–Si–Al Resistive Films

Effects of Zr Addition on the Deformation Behavior, Microstructure and Mechanical Properties of Dental Ti Alloys

The Role of Aluminum in the Crystallization of Cr–Si–Ni Resistive Films

Effect of Nitrogen on Crystallization Behavior and Electrical Properties of Cr-Si-Al Resistive Films

The Crystallization of Cr–Si–Ni–Al Amorphous Films—nucleation and Growth of Intermetallic Phase Cr(Al,Si)2

Formation of an Intermetallic Phase by Crystallization in the Cr–Si–Ni–Al Amorphous Film

Design of amorphous-nanocrystalline films of TiAlCrNbZr x multi-component alloy: The effect of Zr on the corrosion resistance and mechanical properties

The Thermal Stability of Zirconium Aluminate High-K Film on Strained SiGe Layer

The effect of zirconium dopant on the properties of copper films

Microstructure and Electrical Characteristics of Cr–Si–Ni Films Deposited on Glass and Si (100) Substrates by RF Magnetron Sputtering

Microstructure and Electrical Resistivity of Cr-Si-Ni Films Deposited on Si Substrates

The Effects of Zr Underlayer on the Microstructure and Properties of Al Films

Effect of Zr on Microstructure and Mechanical Properties of Binary TiAl Alloys

Effect of Zr addition on properties of Al–Mg–Si aluminum alloy used for all aluminum alloy conductor

Influence of Cr Addition on Microstructure and Mechanical Properties of Zr-based Alloys Corresponding to Zr–C–Cr System

Interfacial and microstructural properties of zirconium oxide thin films prepared directly on silicon

Microstructure and mechanical properties of Zr3Al3C5-based ceramics synthesized by Al-Si melt infiltration

Thermal Stability and Interfacial Properties of Zralxsiyoz Films Prepared by Pulse-Laser Deposition

Crystallization behavior and corrosion resistance of Al86Ni10Zr4 amorphous alloy under different annealing treatment conditions

Thickness Dependence of the Crystallization and Phase Transition in ZrO 2 Thin Films

Influence of Sputtering Atmosphere on Crystal Quality and Electrical Properties of Zirconium Aluminum Nitride Thin Film