Abstract:An in-situ measurement system for porous alumina (PA) film based on atomic force microscope (AFM) in liquid and reflectometric interference spectroscopy (RIFS) was developed. The present article briefly discusses the principle and structure of the system, and introduces its unique characteristic. The system consists of probe unit, XY scanner, Z-piezo feedback system, computer and software, fiber optic spectrometer, anodization control circuitry etc. When a white light beam illuminates the surface of the film, the reflective light beams at the front and back side of the layer are coherent, and lead to periodical amplifications and extinction in the reflective spectrum with the information of the optical thickness of the film. A fiber optic spectrometer was applied in the system which input the refractive spectrum into the computer by which the optical thickness of the film was calculated. Meanwhile according to the surface topography of PA films by AFM in liquid, the effective refractive index was calculated based on Maxwell-Garnett theory and coherent potential approximation (CPA). So the thickness of PA films could be gained at last. To checkout the feasibility and stability of the system, the real-time scanning and thickness measurement experiments were done during anodization of Al sheets in oxalic acid aqueous solution. In the experiment, the authors used 25 mm diameter aluminum (Al) sheets with 99.999% purity and 0.4 mm thickness as the anode, and graphite rod as the cathode. The pretreatment-cleaned Al sheets were anodized in an aqueous solution of 0.5 mol x L(-1) oxalic acid at the constant temperature (20 +/- 0.2) degrees C with 20 mA x cm(-2) anodization electronic current density. Real-time AFM images of PA film were successfully obtained during anodization. The pore-ratios of Al sheet were 7.81% and 13.83% at oxidizing time 150 min and 180 min respectively. Correspondingly, the effective indexes were calculated to be 1.62 and 1.60, respectively. Combining the reflective spectrum gained by the fiber optic spectrometer, the wave number differences between the two adjacent extrema were 57.69 mm(-1) and 50.00 mm(-1). Based on reflectometric interference spectroscopy, the thickness of PA films was found to be 5.35 and 6.25 microm with oxidizing time 150 min and 180 min respectively. The system has characteristics of convenient manipulation, non-destructive and high-resolution in-situ measurement. And the surface morphology, pore-ratio and effective refractive index can also be gained at the same time.

Determining mean thickness of the oxide layer by mapping the surface of a silicon sphere.

Determination of Mean Thickness of an Oxide Layer on A Silicon Sphere by Spectroscopic Ellipsometry

Thickness measurement of the oxide layer on the silicon sphere by spectroscopic ellipsometry

A Novel Ellipsometer for Measuring Thickness of Oxide Layer on the Surface of Silicon Sphere

Mixed polarization in determining the film thickness of a silicon sphere by spectroscopic ellipsometry

Evaluating Uncertainty of the Mean Diameter of Silicon Sphere by Spherical Harmonics

A Novel Method for Diameter Measurement of Silicon Single Crystal

Interferometric diameter determination of a silicon sphere using a traceable single laser frequency synthesizer

Interferometric determination of the silicon sphere diameter using a laser frequency tuning system calibrated by a Fabry-Perot cavity

A New Method for Measuring Multilayer Thickness Using a Chromatic Confocal Sensor

Experimental determination of reference intensity ratio essential for accurate thickness measurement of HfO2 ultrathin films by XPS

Determining by Raman spectroscopy the average thickness and N -layer-specific surface coverages of MoS 2 thin films with domains much smaller than the laser spot size

Study of In-Situ Measurement System for Porous Alumina Film Based on AFM and Reflectometric Interference Spectroscopy

Air Flow Turbulence Orthogonality and Surface Error Estimation in Large Aperture Optical Testing

Quantitative Raman Spectrum and Reliable Thickness Identification for Atomic Layers on Insulating Substrates

Probing lattice vibration at surface and interface of SiO$_2$/Si with nanometer resolution.

Novel wide-angle ellipsometric arrangement for thin film thickness measurement

Fizeau-type interferometric probe to measure geometrical thickness of silicon wafers

Rapid Thickness Identification Methodology for Two-Dimensional MoS2 and In2 Se3 Nanosheets Using Optical Microscopy

Measurement Error in Atomic-Scale STEM-EDS Mapping of a Model Oxide Interface

Optical-based thickness measurement of MoO$_3$ nanosheets