Abstract:Fischer-Tropsch synthesis (FTS) is a classical topic of great significance because of the approach of post-petroleum times. Recently we found that, taking the advantage of the anchoring effect and intrinsic basicity of nitrogen-doped carbon nanotubes (NCNTs), iron nanoparticles could be conveniently immobilized on the NCNTs without surface pre-modification. The so-constructed Fe/NCNTs catalyst presents the superb catalytic performance in FTS with high selectivity as well as high catalytic activity and stability. In this study, three Fe/NCNTs catalysts were prepared by incipient wetness impregnation method, colloidal method and deposition-precipitation method, denoted as Fe/NCNTs-IWP, Fe/NCNTs-C, and Fe/NCNTs-DP, respectively. The influence of preparation methods on the particle size distribution and morphology, reduction and carbonization of the active species, as well as the FTS catalytic performance were systematically examined. The results indicate that the incipient impregnation method could achieve high dispersion, smaller particles and narrower size distribution [(8 +/- 4) nm], leading to the easier reduction and carbonization of the iron nanoparticles compared with those prepared by the other two methods. The FTS catalytic performance of the Fe/NCNTs-IWP catalyst is much better than those of the Fe/NCNTs-C and the Fe/NCNTs-DP catalysts in terms of the high lower olefins selectivity, high catalytic activity and stability. Colloid method got the different morphologies of iron particles with the average size of (13 +/- 7) nm. The active iron species was susceptible to oxidation during the reaction, which cause poor catalytic activity and stability. The deposition-precipitation method got the largest particles of (19 +/- 11) nm which were difficult to be reduced and carbonized, leading to the sharp decline of the catalytic activity and stability after 15 h reaction. The size-dependence of the catalytic performance for the Fe/NCNTs catalysts in this study are generally in consistent with those in literatures for the iron catalysts supported on carbon nanotubes. These results should be suggestive for exploring the advanced FTS catalysts with the abundant N-doped carbon nanostructures.

RESEARCH ONPROCESS PARAMETERS FORCARBON NANOTUBES PREPARATION IN INDUSTRIAL VICE-PRODUCTS

RESEARCH ONPROCESS PARAMETERS FORCARBON NANOTUBES PREPARATION IN INDUSTRIAL VICE-PRODUCTS

Carbon Nanotubes Preparation in Industrial Vice-Products

Influence of Mesoporous Materials on the Preparation of Carbon Nanotubes

Research Progress on the Preparation and Application of Carbon Nanotubes

Preparation of Carbon Nanotubes at the Surface of Fe/SBA-15 Mesoporous Molecular Sieve

PREPARATION AND MECHANICAL PROPERTIES OF CARBON NANOTUBES/RESIN EPOXY COMPOSITE

In situ growth of CNTs on carbon fiber by chemical vapor deposition

EXPERIMENTAL RESEARCH ON SYNTHESIS OF CARBON NANOTUBES

Influence of Preparation Methods on Catalytic Performance of Fe/Ncnts Fischer-Tropsch Catalysts

High-Yield Production of Multi-Walled Carbon Nanotubes by Catalytic Decomposition of Benzene Vapor

Controllable growth of double wall carbon nanotubes in a floating catalytic system

Preparation of carbon nanofibers by the floating catalyst method

Continuous Preparation of High-performing Carbon Nanotube Fibers Based on Cycloalkane/ethanol Mixing Carbon Source

PARAMETRIC STUDY FOR THE PREPARATION OF ALIGNED SINGLE-WALLED CARBON NANOTUBES BY ANODE-ARC DISCHARGE METHOD

Large-Scale and Selective Synthesis of Carbon Nanofiber Bundles, Curved Carbon Nanofibers and Helical Carbon Nanofibers.

THE MICRO-STRUCTURE OF CARBON-COATED IRON PARTICLES AND RADIALLY-GROWN CARBON NANOTUBES

Synthesis and Characterization of Multi-wall Carbon Nanotubes Using Innoxious Liquid Paraffin As Carbon Source

Preparation of High Purity Carbon Nano -Tubes from Ethylene Decomposition over Nanosized Iron- Based Catalysts

Experimental and Simulation Research on the Preparation of Carbon Nano-Materials by Chemical Vapor Deposition

Catalysts effect on morphology of carbon nanotubes prepared by catalytic chemical vapor deposition in a nano-agglomerate bed