Abstract:Due to the excellent physical and chemical properties, carbon nanotubes show broad applications in a variety of fields such as composite materials, catalysis, energy, medicine and sensor. However, at present, the carbon nanotubes are mainly practically used in the form of powders. Carbon nanotube fibers can be prepared by the methods of chemical vapor deposition and/or dry spinning. However, the carbon source used in previous study mainly has single component, making the mechanical and electrical properties of carbon nanotube fibers still difficult to effectively meet the practical application requirements. It remains challenging to realize continuous preparation of high-performance carbon nanotube fibers. In this work, a new cycloalkane/ethanol mixing carbon source was designed to obviously promote the continuous growth process and properties of carbon nanotube fibers. After carefully optimizing the component ratio of decahydronaphthalene/ethanol in the precursor solution, and systematically optimizing reaction conditions such as catalyst content (ferrocene and thiophene), injection rate of the precursor solution, and the flow rate of carrier gas (argon and hydrogen), the continuous preparation of high-performance carbon nanotube fibers was realized. When the mass ratio of decahydronaphthalene to ethanol carbon source in precursor solution is 3:7, the high-performance carbon nanotube fibers can be continuously produced for a long time with a collection rate of 220 m/h. It shows improved mechanical and electrical properties compared with the carbon nanotube fiber prepared by using single ethanol carbon source. For instance, the tensile strength of carbon nanotube fiber is increased by more than 1 time (750 MPa). The carbon nanotube fiber has good flexibility and can shows stable mechanical properties after millions of bending cycles. The conductivity is increased by more than 4 times (4.8x10(3) S/cm), which can effectively meet the application requirements of fiber energy-storing devices. The application of carbon nanotube fibers in a fiber-shaped lithium-carbon dioxide battery is demonstrated with good electrochemical performance.

Preparation of carbon nanofibers by the floating catalyst method

Graphitization Behavior of Carbon Nanofibers Prepared by the Floating Catalyst Method

Producing Carbon Nanotube Powder in A Floating Iron Catalyst Lpcvd System

Co-synthesis of Single-Walled Carbon Nanotubes and Carbon Fibers

The influence of preparation parameters on the mass production of vapor-grown carbon nanofibers

Continuous Preparation of High-performing Carbon Nanotube Fibers Based on Cycloalkane/ethanol Mixing Carbon Source

Byproducts of Floating Catalyst Method for Preparing Carbon Nanotubes

Continuous and Scalable Fabrication and Multifunctional Properties of Carbon Nanotube Aerogels from the Floating Catalyst Method

Synthesis of Single-Walled Carbon Nanotubes by the Vertical Floating Catalyst Method

FEW WALLED CARBON NANOTUBE PRODUCTION IN LARGE-SCALE BY NANO-AGGLOMERATE FLUIDIZED-BED PROCESS

Producing cleaner double-walled carbon nanotubes in a floating catalyst system

Kinetically Controlled Synthesis of Carbon Nanofibers with Different Morphologies by Catalytic CO Disproportionation over Iron Catalyst

Large-Scale and Selective Synthesis of Carbon Nanofiber Bundles, Curved Carbon Nanofibers and Helical Carbon Nanofibers.

Long Bundles of Aligned Carbon Nanofibers Obtained by Vertical Floating Catalyst Method

Controllable growth of double wall carbon nanotubes in a floating catalytic system

Controllable preparation of helical carbon nanofibers by CCVD method and their characterization

Controllable and Large-Scale Synthesis of Carbon Nanofibers, Bamboo-Like Nanotubes, and Chains of Nanospheres over Fe/Sno2 and Their Microwave-Absorption Properties

Production of Carbon Nanofibers Using a CVD Method with Lithium Fluoride as a Supported Cobalt Catalyst

Production of High Quality Single-Walled Carbon Nanotubes in a Nano-Agglomerated Fluidized Bed Reactor

Preparation of Carbon Nanofibers over Carbon Nanotube-Nickel Catalyst in Propylene Decomposition

Floating Bimetallic Catalysts for Growing 30 cm‐Long Carbon Nanotube Arrays with High Yields and Uniformity