Abstract:Orthogonal time division multiplexing (OrthTDM) interleaves sinc-shaped pulses to form a high baud-rate signal, with a rectangular spectrum suitable for multiplexing into a Nyquist WDM (N-WDM)-like signal. The problem with generating sinc-shaped pulses is that they theoretically have infinite durations, and even if time bounded for practical implementation, they still require a filter with a long impulse response, hence a large physical size. Previously a method of creating chirped-orthogonal frequency division multiplexing (OFDM) pulses with a chirped arrayed waveguide (AWG) filter, then converting them into interleaved quasi-sinc pulses using dispersive fiber (DF), has been proposed. This produces a signal with a wider spectrum than the equivalent N-WDM signal. We show that a modification to the scheme enables the spectral extent to be reduced for the same data rate. We then analyse the key factors in designing an OrthTDM transmitter, and relate these to the performance of a N-WDM system. We show that the modified transmitter reduces the required guard band between the N-WDM channels. We also simulate a simpler scheme using an unchirped finite-impulse response filter of similar size, which directly creates truncated-sinc pulses without needing a DF. This gives better system performance than either chirped scheme.

All-Optical Clock Enhancement for Transmitted Nrz Data Streams Based on Cfbg

All-Optical Clock Recovery from Non-Return to Zero Data Stream Based on Semiconductor Optical Amplifier and Stimulated Brillouin Scattering

Systems Performance Comparison of Three All-Optical Generation Schemes for Quasi-Nyquist WDM.

All Optical Clock Recovery from Degraded Non-Return-to-Zero Data Stream

Multiwavelength All-Optical Clock Recovery of Non-Return-To-Zero Data

All-Optical, Bit-Rate Tunable Clock Recovery For Nrz-Ask Signals

Optimizing Clock Enhancement to Achieve Modulation-Format-Independent All-Optical Clock Recovery

All-optical Clock Extraction for CSRZ Modulation Data

Clock Recovery from CSRZ Based on Stimulated Brillouin Stattering

High Speed Fiber-Based Clock Enhancement of NRZ Data

Using Signal Pre-Distortion to Enhance the Performance of All-Optical Clock Recovery

Optical Clock Recovery and 3R Regeneration for 10-Gb/s NRZ Signal to Achieve 10 000-hop Cascadability and 1 000 000-km Transmission

Simultaneous Realization of Optical Carrier-Suppression and SSB Modulation in Wireless Fiber Links Using Fiber Bragg Grating

1000 Cascaded Stages of Optical 3r Regeneration with Soa-Mzi-Based Clock Enhancement to Achieve 10-Gb/s 125.000-Km Dispersion Uncompensated Transmission

Optical Clock Extraction And Self-Routeing Using A Semiconductor Nonlinear Multilayer Structure

Low timing jitter 40 Gb/s all-optical clock recovery based on an amplified feedback laser diode

Experimental Demonstration Of An All-Optical Clock And Data Recovery Technology For 10 Gb/S Nrz-Dpsk Signals

All-Optical Clock Recovery From 40 Gbit/S Rz Signal Based On Microring Resonators

All-optical Format Conversion from NRZ to CSRZ and Between RZ and CSRZ Using SOA-based Fiber Loop Mirror

Optical clock recovery with dual-wavelength output from degraded RZ and NRZ signals

All-optical frequency multiplication/recovery based on the semiconductor optical amplifier ring cavity