Abstract:Vinyl chloride/ N-phenylmaleimide copolymer ( VC/PMI) and vinyl chloride/ N-phenylmaleimide/ acrylonitrile terpolymer (VC/PMI/AN) were synthesized in the suspension copolymerization process for improving the heat resistance of poly( vinyl chloride) PVC) This paper emphasized on the studies on the characterization of the heat resistant properties of these three co) polymers mainly by means of dynamic mechanical experiment with the change of storage modulus ( E'), change rate of E' with temperature and mechanical loss factor ( tandelta) near the glass transition. The Vicat softening point ( VSP) was also tested supplementally for comparison. The lower the change rate of E' with temperature is, the higher the heat resistance of VC/PMI and VC/PMI/AN will be. The effects of the amount of PMI and AN in the recipes of copolymerization on the change rate of E' with temperature, tandelta and VSP were also investigated. The results show that the increase of the amount of PMI will increase the rigidity of the backbone of the copolymer chain so as to improve the heat resistance. On the other hand, the introduction of AN into the copolymer will give more uniform distribution of PMI unit or segment in the backbone, and thus improves the heat resistance of the copolymer further. It is discovered that there are two peaks of mechanical loss or two glass transition temperatures of VC/PMI/AN copolymerization product. It may be interpreted from the higher reactivities of PMI and AN than VC. During the copolymerization process of VC, PMI and AN, the more active PMI and AN will copolymerize more rapidly and will consume entirely at conversion of about 45% similar to 50%. Thereafter, VC continues to homopolymerize to form PVC homopolymer until a final conversion of 85%. Actually, the final product is a mixture of VC/PMI/AN terpolymer and homo-PVC, showing two T(g)s.

Control and Optimization for Vinyl Chloride/N-Phenylmaleimide Copolymer Composition

Prediction, Control and Optimization for Vinyl Monomer/N-Phenylmaleimide Copolymers Composition

Heat Resistant Properties of Vinyl Chloride-N-Phenylmaleimide (-Acrylonitrile) Suspension Polymerized Copolymer

Mechanism and kinetics of emulsion copolymerization of vinylidene chloride—Critical conversion at the end of interval 2 and rate of polymerization

Morphology and blowing agent encapsulation efficiency of vinylidene chloride copolymer microspheres synthesized by suspension polymerization in the presence of a blowing agent

Influence of Small Amount of Co-Monomers on Acrylonitrile Polymerization in Dimethylformamide (DMF) Solution

Study on Suspension Copolymerization Rate of Vinyl Chloride/n-Phenylmaleimide

Principle and Application of Composition Distribution Measurement for Vinyl s/N-Phenyl mai eimide Copolymer

Controlling the conversion of in- situ suspension polymerization of VCM/nano - CaCO3

Reactivity Ratios and Copolymer Composition of Vinyl Chloride and N-Substituted Maleimide Copolymerization

Research of Styrene/Aerylonitrille/N-Phenlymaleimide Emalsion Copolymerization

Studies on the Glass Transition Temperature of VC/PMI Copolymer

Mutual Solubility And Bulk Copolymerization Of Vinyl Monomers With N-Substituted Maleimide

Synthesis of chemically crosslinked poly(vinyl chloride) by vinyl chloride/divinyls suspension copolymerization

Synthetic Features and Mechanism for the Preparation of Vinyl Chloride-co-Butyl Acrylate-co-Vinyl Acetate Terpolymer via Precipitation Polymerization

KINETICS OF SUSPENSION COPOLYMERIZATION OF VINYLIDENE CHLORIDE WITH ACRYLONITRILE

N-TERT-BUTYL-α-PHENYLNITRONE MEDIATED SUSPENSION POLYMERIZATION OF VINYL CHLORIDE

Processability of Vinylidene Chloride-Vinyl Chloride Suspension Copolymer

STUDIES ON COMPOSITION OF COPOLYMERS IN VINYLIDENE CHLORIDE-ACRYLONITRILE SUSPENSION COPOLYMERIZATION

Kinetics of Vinylidene Chloride / Acrylonitrile / Styrene Suspension Polymerization

HEAT RESISTANCE MECHANISM OF HEAT RESISTANT POLYVINYL CHLORIDE