Abstract:Achieving high superplasticity in single-phase Al alloys remains a challenge, since the fine-grained structure required for superplastic deformation coarsens rapidly in the absence of dispersed second-phase particles during tensile deformation at elevated temperatures. This paper concentrates on the superplastic response of a high solid solution Al–7Mg alloy processed by equal-channel angular pressing (ECAP) under uniaxial tension. The ECAP-processed Al–7Mg alloy features multi-scale microstructural heterogeneities including a bimodal grain structure and Mg solute segregation along grain boundaries (GBs) of nano/ultrafine grains. To identify effects of multi-scale microstructural heterogeneities on superplastic deformation behavior of the high solid solution Al–7Mg alloy, microstructural evolutions are studied systematically by combing electron backscatter diffraction (EBSD), ASTAR-transmission electron microscopy (TEM) orientation imaging and atom probe tomography (APT). During deformation at the optimal tensile condition of 573 K and 1 × 10−3 s−1, the heterogeneous microstructure evolves to a stable uniform fine grain structure via continuous dynamic recrystallization (CDRX), and impressive superplasticity of ∼523% elongation is achieved. The high superplasticity is discussed in terms of the cooperated mechanism by dislocation slip accommodated by CDRX at the early tensile deformation stage and grain boundary sliding (GBS) at the late deformation stage. Our findings show that the evolution of microstructural heterogeneities in high solid solution Al–Mg alloys can be regulated, favoring for superplastic deformation, which offers an alternative strategy for developing low-cost Al alloys for enhanced mechanical properties.

Effective Means of Microstructure Homogenization for AgMeO Electrical Contact Materials—Cumulative Extrusion Severe Plastic Deformation Method

Effective Means of Microstructure Homogenization for AgMeO: Cumulative Extrusion Severe Plastic Deformation

Microstructures of AgMeO electric contact materials by reactive synthesis and severe plastic deformation

Experimental Study of High-Frequency Vibration Assisted Micro/Mesoscale Forming of Metallic Materials

Process and simulation of severe plastic deformation for AgMeO composites by reactive synthesis

Effect of Severe Plastic Deformation on Microstructures and Properties of Agcuo Composites

Inner Oxide Fabrication and Severe Plastic Deformation Microstructure Homogenization of Silver Cerium Oxide Composites

Microhardness Distribution and Microstructural Evolution in Pure Aluminum Subjected to Severe Plastic Deformation: Elliptical Cross-Sectioned Spiral Equal-Channel Extrusion (ECSEE)

Effects of electromagnetic stirring and subsequent homogenization treatment on the microstructure and mechanical properties of Al70Zn10Mg10Cu5Si5 multi-component alloy

Effect of Extrusion Process on Microstructure and Mechanical Properties of ME20M Magnesium Alloy

Research Progress on the Microstructure Evolution Mechanisms of Al-Mg Alloys by Severe Plastic Deformation

Microstructure and Service Life of Silver Copper Oxide Contact Materials after Reactive Synthesis Fabrication and Severe Plastic Deformation

Microstructure evolution, constitutive modeling and forming simulation of AA6063 aluminum alloy in hot deformation

Achieving high strain rate superplasticity in an Al-Cu-Li alloy processed by thermo-mechanical processing

Thixotropic Deformation Behavior, Rapid Spheroidization and Solid-Liquid Homogenization of Semi-Solid Al0.8Co0.5Cr1.5CuFeNi HEA with Multilevel Microstructure

Deformation behavior and dynamic recrystallization during hot compression in homogenized Al–6Mg–0.8Mn alloys

Experimental Study on Pure Copper Subjected to Different Severe Plastic Deformation Modes

Prominent role of multi-scale microstructural heterogeneities on superplastic deformation of a high solid solution Al–7Mg alloy

Microstructure evolution of aluminum alloy under quasi-static, mechanical dynamic, and electromagnetic dynamic deformation

Effect of Deformation on Precipitation and the Microstructure Evolution during Multistep Thermomechanical Processing of Al-Zn-Mg-Cu Alloy

Finite Element Simulation and Experimental Investigation on Homogeneity of Mg-9.8Gd-2.7Y-0.4Zr Magnesium Alloy Processed by Repeated-Upsetting