Abstract:Forced mixing to a single phase or supersaturated solid solution (SSS) and its prerequisite microstructure evolution in immiscible systems has been a focus of research for both fundamental science and a variety of applications. Controlling the formation of SSS by shear deformation assisted processing could enable a material design beyond conventional equilibrium microstructure in immiscible systems. Here, a highly immiscible (mixing enthalpy of ~ 20 kJ·mol-1) Cu-50 at. % Cr binary alloy was employed to investigate the microstructure evolution and localized tendencies of SSS during severe shear deformation. The present results demonstrate distinctive defect mediated microstructure refinement process in each phase and how it leads to localized SSS as a function of shear strain. Preferential dynamic recrystallization occurs in the softer Cu phase due to strain localization, leading to substantial grain refinement. The refinement of Cr phase in the top-most layer, however, is enabled by the progressive evolution of grain lamination, splitting, and fragmentation as a function of shear strain. The eventual SSS is found to be strongly dependent on the local environments that affect the dislocation activity, including the level of microstructure refinement, the interfacial orientation relationship, hardness difference, and supposed stability of oxidation. Ab initio simulations confirm that it is more favorable to oxidize Cr than Cu at incoherent Cu/Cr interfaces which then limits the mass transport on an incoherent boundary. Our results shed light on the underpinning mechanism for non-equilibrium mass transport in immiscible systems upon severe deformation that can be applicable to a variety of processing techniques aimed at producing immiscible alloys with superior mechanical properties.

Effective Means of Microstructure Homogenization for AgMeO: Cumulative Extrusion Severe Plastic Deformation

Effective Means of Microstructure Homogenization for AgMeO Electrical Contact Materials—Cumulative Extrusion Severe Plastic Deformation Method

MMCs with Controlled Non-Uniform Distribution of Submicrometre Al2O3particles in 6061 Aluminium Alloy Matrix

Process and simulation of severe plastic deformation for AgMeO composites by reactive synthesis

Achieving Homogeneous Fe Distribution and High Strength in Cu-Fe Composite Consolidated by Powder Rolling

Inner Oxide Fabrication and Severe Plastic Deformation Microstructure Homogenization of Silver Cerium Oxide Composites

Microstructures of AgMeO electric contact materials by reactive synthesis and severe plastic deformation

Research Progress on the Microstructure Evolution Mechanisms of Al-Mg Alloys by Severe Plastic Deformation

Effect of Severe Plastic Deformation on Microstructures and Properties of Agcuo Composites

Microstructure evolution and composition redistribution of FeCoNiCrMn high entropy alloy under extreme plastic deformation

Thixotropic Deformation Behavior, Rapid Spheroidization and Solid-Liquid Homogenization of Semi-Solid Al0.8Co0.5Cr1.5CuFeNi HEA with Multilevel Microstructure

Microstructure and Mechanical Properties of High Strength Al2o3p/6061al Composites

Effects of electromagnetic stirring and subsequent homogenization treatment on the microstructure and mechanical properties of Al70Zn10Mg10Cu5Si5 multi-component alloy

Microstructure evolution, constitutive modeling and forming simulation of AA6063 aluminum alloy in hot deformation

Finite Element Simulation and Experimental Investigation on Homogeneity of Mg-9.8Gd-2.7Y-0.4Zr Magnesium Alloy Processed by Repeated-Upsetting

Coupling Between Deformation and Mass Transport in an Immiscible Alloy at High Shear Strains

Grain size and orientation affected deformation inhomogeneity and local damage of hot-deformed Al-Zn-Mg alloy

Effect of hot extrusion on the microstructure and mechanical properties of SiCNWs/Mg-2Zn-0.1Y composite

Achieving high strain rate superplasticity in an Al-Cu-Li alloy processed by thermo-mechanical processing

A direct extrusion‐shear deformation composite process that significantly improved the metallurgical bonding and texture regulation grain refinement and mechanical properties of hot-extruded AZ31/AA6063 composite tubes

Microstructure Evolution, Constitutive Modelling, and Superplastic Forming of Experimental 6XXX-Type Alloys Processed with Different Thermomechanical Treatments