Abstract:This work conducts an integrated experimental and simulation research on the multiple mechanisms of performance improvement of a metal matrix composite via a new severe plastic deformation method, i.e., elliptical cross-section torsion extrusion (E-TE). Results evidence that the E-TE efficiently homogenizes the particle distribution and refines the composite’s microstructure, thus yields a simultaneous improvement of the strength and ductility. The microstructure refinement is dominated by mechanical deformation and processing temperature and mainly attributed to the joint effect of three mechanisms: (1) fragmenting of large grains and smashing of particle bands/clusters due to extensive shear deformation of the E-TE; (2) higher driving force and more nucleation sites provided by fine precipitation and reinforced particles for dynamic recrystallization (DRX) through accelerating dislocation generation and pinning dislocation movement, as well as additional DRX by coarse particles via particle stimulated nucleation; (3) the impeding of grain growth by dispersed particles. Moreover, increasing processing temperature results in the successive coarsening and dissolution of precipitations; the precipitation dissolution deteriorates the grain refinement and weakens the strength of the particle/matrix interface. Full-field crystal plasticity simulations reveal that the strength improvement of the E-TE processed composite is mainly attributed to grain boundary strengthening, while reinforced particles sustain high stress and strengthen the matrix as well, and these contributions increase with the decrease of the matrix’s grain size. The grain refinement and particle homogenization also improve the fracture toughness and ductility of the composite by retarding the generation of damages and impeding the crack propagation.

Inner Oxide Fabrication and Severe Plastic Deformation Microstructure Homogenization of Silver Cerium Oxide Composites

Effective Means of Microstructure Homogenization for AgMeO: Cumulative Extrusion Severe Plastic Deformation

Effect of Severe Plastic Deformation on Microstructures and Properties of Agcuo Composites

Process and simulation of severe plastic deformation for AgMeO composites by reactive synthesis

Effects of Ce additions on microstructure and properties of Cu-15Cr in situ composite

Microstructure and hot deformation behavior of nano and micron hybrid Al2O3 particles dispersion strengthened copper base composites

In situ fabrication and microstructure of Al2O3 particles reinforced aluminum matrix composites

The Effect of Rare Earth CeO2 on Microstructure and Properties of in Situ TiC/Al–Si Composite

Microstructure and Service Life of Silver Copper Oxide Contact Materials after Reactive Synthesis Fabrication and Severe Plastic Deformation

Effect of CeO2 Content on Microstructure and Properties of SiCp/Al-Si Composites Prepared by Powder Metallurgy

Microhardness Distribution and Microstructural Evolution in Pure Aluminum Subjected to Severe Plastic Deformation: Elliptical Cross-Sectioned Spiral Equal-Channel Extrusion (ECSEE)

Ce Effects on Deformation‐induced Microstructure Evolution in Cu‐Ti‐Ni‐Mg Alloys

Fabrication, microstructure and mechanical properties of in situ Al2O3 platelets reinforced Ce-TZP composites

In-situ solid-state deformation-driven rapid reaction towards higher strength-ductility Al-CuO composites

Fabrication, microstructure and multi-scale mechanical properties of 2.5D oxide fiber reinforced oxide composites

Microstructures of AgMeO electric contact materials by reactive synthesis and severe plastic deformation

Mechanisms of Simultaneously Improving the Strength and Ductility of an In-Situ Tib &Lt;sub>2</sub>/al-Zn-mg-cu Composite by Elliptical Cross-Section Torsion Extrusion

Effect of Si on Microstructure and Mechanical Properties of Multi-Nano-Oxide Dispersion Strengthening Ferritic Alloys

Thixotropic Deformation Behavior, Rapid Spheroidization and Solid-Liquid Homogenization of Semi-Solid Al0.8Co0.5Cr1.5CuFeNi HEA with Multilevel Microstructure

PREPARATION AND MICROSTRUCTURE OF IN SITU REINFORCED Ce-TZP MATRIX COMPOSITES

Fabrication, Microstructure and Mechanical Properties of In Situ Al<sub>2</sub>O<sub>3</sub> Platelets Reinforced Ce-TZP Composites