Abstract:In this work, we investigated the effects of alloying elements on plastic deformation and microstructure evolution in polycrystalline copper (Cu) and Cu alloyed with 1 wt. lead (Cu-1 Pb). These materials were selected due to the size mismatch between Cu and Pb, with the latter forming precipitates at grain boundaries. Multi-modal characterization techniques, including neutron diffraction, electron backscatter diffraction (EBSD), and transmission electron microscopy (TEM), along with finite element simulations were employed to study the deformation behavior across multiple length scales. While both Cu and Cu-1 Pb exhibited similar macroscale response and final deformation textures, both dislocation line profile analysis and TEM revealed increased dislocation density in deformed Cu-1 Pb specimens. The presence of lead precipitates also significantly affected local plastic deformation during compression, with their influence diminishing with increasing strain. These results demonstrate the complex relationships between alloying elements, plastic deformation, microstructural evolution, and material behavior under load. The insights gained from this multi-scale and multi-technique approach contribute to the fundamental understanding of microstructural evolution in immiscible alloys and are valuable for tailoring the properties of structural materials for specific engineering applications.

Effect of Severe Plastic Deformation on Microstructures and Properties of Agcuo Composites

Effect of cryogenic impact deformation and subsequent annealing on microstructure and microhardness of pure copper

The Effects of CuO Particle Size on Microstructure Evolution of AgCuO Compo-Sites in Plastic Deformation Process: Finite Element Simulation and Experimental Study

Micro-Superplastic Behavior of Copper Oxide in AgCuO Composites

Process and simulation of severe plastic deformation for AgMeO composites by reactive synthesis

Inner Oxide Fabrication and Severe Plastic Deformation Microstructure Homogenization of Silver Cerium Oxide Composites

Effect of plastic deformation on microstructure and properties of high strength Al-Cu-Li-X aluminum-lithium alloy

Effects of Cr addition on the microstructural, mechanical and electrical characteristics of Cu–6wt.%Ag microcomposite

Deformation characteristics of metal clad metal Ag-20Cu macro-composite by severe plastic deformation

Effects of Deformation on the Mechanical Properties of Deformation Processed Ag-20Cu Macro-composite Wires

Co-deformation in Cu–6 Wt.% Ag Nanocomposites

Microstructure evolution and properties of Cu–Ag microcomposites with different Ag content

EFFECTS OF DEFORMATION ON THE MICROSTRUCTURE AND PROPERTIES OF 6082 ALUMINUM ALLOY

Effective Means of Microstructure Homogenization for AgMeO: Cumulative Extrusion Severe Plastic Deformation

EFFECTS OF Ag CONTENT ON MICROSTRUCTURE AND PROPERTIES OF THE FILAMENT STRENGTHENED Cu-Ag ALLOYS

Effect of Homogenization Treatment on Microstructure and Properties for Cu–Fe–Ag in Situ Composites

Effect of Superplastic Deformation on the Properties of Zirconia Dispersed Alumina Nanocomposite

W-Cu Composites Subjected To Heavy Hot Deformation

Strain Strengthening Of Ag-10cu In Situ Filamentary Composite Prepared By Heavy Deformation

Alloying effects on deformation induced microstructure evolution in copper

The effect of cumulative large plastic strain on the structure and properties of a Cu–Zn alloy