Abstract:Performance of symmetrical ferrite‐based fuel electrodes for solid oxide electrolysis applications. There is an increasing interest in the exploration of non‐Nickel cathode materials for steam electrolysis in solid oxide electrolysis cells (SOEC) for green hydrogen production with high Faradaic efficiencies. Ferrite‐based ceramic materials have drawn a lot of attention in this regard due to their appreciable mixed ionic electronic conductivity. This work aims to explore a ferrite‐based mixed ionic electronic conductor electrode for symmetrical SOEC that can contribute significantly to simplifying the manufacturing processes. A composite of silver (Ag) and A‐site deficient lanthanum strontium cobalt ferrite ((La0.60Sr0.40)0.95Co0.20Fe0.80O3‐x), is studied for steam electrolysis in a yttria stabilized zirconia electrolyte‐supported symmetrical tubular solid oxide cell. A considerable current density of 250 mA cm−2 is obtained at 1.5 V and 800 °C in a Helium‐Steam atmosphere (50% humidified) with a corresponding polarization resistance as low as 0.15 Ω‐cm2. The polarization resistance is comparable to a number of electrodes reported in the literature for steam electrolysis. However, a 10% drop in current density is observed during the first 20 h of electrolysis at 1.5 V and 800 °C in a Helium‐Steam atmosphere (50% humidified), but no further drop is encountered during the next 46 h of continuous operation.

Synthesis and Electrochemical Properties of LSM and LSF Perovskites As Anode Materials for High Temperature Steam Electrolysis

Preparation and Performance of Strontium-doped Lanthanum Ferrite Powder Used in Solid Oxide Electrolysis Cell Composite Anode

Preparation of LSM–YSZ composite powder for anode of solid oxide electrolysis cell and its activation mechanism

Co-synthesized Y-stabilized Bi2O3 and Sr-substituted LaMnO3 Composite Anode for High Performance Solid Oxide Electrolysis Cell

Preparation and Properties of Multi-Layer SOEC Composite Anodes

High-performance LaNi0.6Fe0.4O3-δ-La0.45Ce0.55O2-δ nanoparticles co-loaded oxygen electrode for solid oxide steam electrolysis

High Activity Oxide Pr0.3Sr0.7Ti0.3Fe0.7O3−δ As Cathode of SOEC for Direct High-Temperature Steam Electrolysis

LSCM-GDC as composite cathodes for high temperature steam electrolysis: Performance optimization by composition and microstructure tailoring

An Efficient Symmetrical Solid Oxide Electrolysis Cell with LSFM-based Electrodes for Direct Electrolysis of Pure CO2

Development of Lsm-Based Cathodes for Solid Oxide Fuel Cells Based on Ysz Films

Fabrication of anode supported solid oxide electrolysis cell with the co-tape casting technique and study on co-electrolysis characteristics

Performance of Ferrite‐Based Electrodes for Steam Electrolysis in Symmetrical Solid Oxide Cells

Electrochemical Performance and Stability of Sr-doped LaMnO 3 -Infiltrated Yttria Stabilized Zirconia Oxygen Electrode for Reversible Solid Oxide Fuel Cells

Chemical Compatibility and Properties of Suspension Plasma-Sprayed Srtio3-Based Anodes for Intermediate-Temperature Solid Oxide Fuel Cells

La0.6Sr1.4MnO4 Layered Perovskite Anode Material for Intermediate Temperature Solid Oxide Fuel Cells

Electrochemical Performance and Stability of SrTi0.3Fe0.6Co0.1O3-δ Infiltrated La0.8Sr0.2MnO3Zr0.92Y0.16O2-δ Oxygen Electrodes for Intermediate-Temperature Solid Oxide Electrochemical Cells

High performance solid oxide fuel cells with electrocatalytically enhanced (La, Sr)MnO3 cathodes

Synthesis and characterization of Ca doped LaMnO3 as potential anode material for solid oxide electrolysis cells

Sm0.5Sr0.5MnO3 As a Potential Cathode Material for Intermediate Temperature Solid Oxide Fuel Cells

Synthesis And Characterization Of La0.75sr0.25mn0.5cr0.5-Xcuxo3-Delta For Sofc Anode Material

Reduced-temperature Redox-Stable LSM As a Novel Symmetrical Electrode Material for SOFCs