Abstract:Abstract High temperature steam (H 2 O) electrolysis via a solid oxide electrolysis cell is an efficient way to produce hydrogen (H 2 ) because of its high energy conversion efficiency as well as simple and green process, especially when the electrolysis process is combined with integrated gasification fuel cell technology or derived by renewable energy. However, about 60%–70% of the electricity input is consumed to overcome the large oxygen potential gradient but not for electrolysis to split H 2 O to produce H 2 due to the addition of safe gas such as H 2 in the fuel electrode. In this work, Sr 2 Fe 1.5 Mo 0.5 O 6-δ -Ce 0.8 Sm 0.2 O 1.95 (SFM-SDC) ceramic composite material has been developed as fuel electrode to avoid the use of safe gas, and the open circuit voltage (OCV) has been effectively lowered from 1030 to 78 mV when the feeding gas in the fuel electrode is shifted from 3%H 2 O–97%H 2 to 3%H 2 O–97%N 2 , reasonably resulting in a significantly increased electrolysis efficiency. In addition, it is also demonstrated that the electrolysis current density is greatly enhanced by increasing the humidity in the fuel electrode and the working temperature. A considerable electrolysis current density of − 0.54 A/cm 2 is obtained at 800 °C and 0.4 V for the symmetrical electrolyzer by exposing SFM-SDC fuel electrode to 23%H 2 O–77%N 2 , and durability test at 800 °C for 35 h demonstrates a relatively stable electrochemical performance for steam electrolysis under the same operation condition without safe gas and a constant electrolysis current density of − 0.060 A/cm 2 . Our findings achieved in this work indicate that SFM-SDC is a highly promising fuel electrode for steam electrolysis.

High Activity Oxide Pr0.3Sr0.7Ti0.3Fe0.7O3−δ As Cathode of SOEC for Direct High-Temperature Steam Electrolysis

Performance of Ferrite‐Based Electrodes for Steam Electrolysis in Symmetrical Solid Oxide Cells

Synthesis and Electrochemical Properties of LSM and LSF Perovskites As Anode Materials for High Temperature Steam Electrolysis

Enhancing the steam electrolysis by simultaneously regulating the electron and oxygen ion conductivity of la 1-x sr1+xfeo 4-δ oxides

Electrochemical performance and microstructural characterization of solid oxide electrolysis cells

Properties of cathode-supported solid oxide electrolysis cells for hydrogen production

(Invited) Advanced Electrode and Electrolyte Materials for Proton Conducting Solid Oxide Electrolysis Cells

Preparation and Properties of PrBa0.5Sr0.5Co1.5Fe0.5O5+δ As Novel Oxygen Electrode for Solid Oxide Electrolysis Cells

Electrolysis of H2O and CO2 in an Oxygen-Ion Conducting Solid Oxide Electrolyzer with a La0.2Sr0.8TiO3+δ Composite Cathode

A highly stable of tungsten doped Pr0.6Sr0.4Fe0.9W0.1O3-δ electrode for symmetric solid oxide fuel cells

La0.6Sr0.4Fe0.8Ni0.2O3-δ perovskite with in-situ exsolved Ni-Fe nanoparticles as high activity catalyst for symmetric solid oxide electrolysis cells

High Temperature Water Electrolysis Using Metal Supported Solid Oxide Electrolyser Cells (SOEC)

Preparation and Characterization of New Cobalt-Free Cathode Pr0.5Sr0.5Fe0.8Cu0.2O3−δ for IT-SOFC

Efficient water splitting through solid oxide electrolysis cells with a new hydrogen electrode derived from A-site cation-deficient La0.4Sr0.55Co0.2Fe0.6Nb0.2O3-δ perovskite

A highly active and stable Sr2Fe1.5Mo0.5O6-δ-Ce0.8Sm0.2O1.95 ceramic fuel electrode for efficient hydrogen production via a steam electrolyzer without safe gas

High-performance LaNi0.6Fe0.4O3-δ-La0.45Ce0.55O2-δ nanoparticles co-loaded oxygen electrode for solid oxide steam electrolysis

Composite Fuel Electrode La(0.2)Sr(0.8)TiO(3-δ)-Ce(0.8)Sm(0.2)O(2-δ) for Electrolysis of CO2 in an Oxygen-Ion Conducting Solid Oxide Electrolyser.

Moisture-dependent electrochemical characterization of Ba0.2Sr1.8Fe1.5Mo0.5O6-δ as the fuel electrode for solid oxide electrolysis cells (SOECs)

Structure Calculation and Performance Research of Perovskite-Type BaxSr1-xCo0.8Fe0.2O3-δ Oxygen Electrode for Hydrogen Production Through High Temperature Solid Oxide Electrolyzer Cells

Electrochemical Characterization and Mechanism Analysis of High Temperature Co-electrolysis of CO2 and H2O in a Solid Oxide Electrolysis Cell

High Performance and Stability Enabled by Tuning the Component Thermal Expansion Coefficients of a Proton-Conducting Solid Oxide Cell Operating at High Steam Concentration