Abstract:The Rapid development of new energy vehicle industry leads to the sharp demand for nickel, cobalt and precious metals in recent years. Because of the similar chemical properties, these metals often exist in Ni-Cu sulfide ores. Traditional treatment of Ni-Cu sulfide ores includes smelting and converting operation. In the smelting process, nickel, copper, cobalt and precious metals are enriched. And then, the low nickel matte obtained by smelting operation was treated by converting process. However, nearly half of cobalt is transferred into slag phase in converting process, leading to a large loss of cobalt. Aiming to increase the recovery of cobalt and precious metals from Ni-Cu sulfide ores, the low nickel matte is treated directly by hydrometallurgical process instead of converting. Because of the weaker affinity of Fe, Co and Ni for sulfur than Cu, the sulfides of Fe, Co and Ni may be decomposed in sulfuric acid solution, while Cu2S and inert precious metals cannot be leached and still remained in the residue. The hydrogen sulfide emitted in the leaching process of low nickel matte can be used to prepare sulfur by Claus method, which has been widely applied in chemical industry. Based on the above considerations, this work developed a promising method for treating low nickel matte. Atmospheric H2SO4 leaching, oversaturated sulfate solutions leaching and iron removal process were carried out, respectively. The leaching efficiencies of more than 99% of nickel, cobalt and iron were obtained, while copper ion cannot be detected in the solution. This process provides a new pathway for the comprehensive utilization of copper-nickel sulfide ore.

Recovery of Nickel and Cobalt from Precipitation of Pyrolusite Leaching Process

Nickel and Cobalt Recovered from Cobalt-nickel Matte Leaching Lixivium

Recovery of Nickel, Copper and Cobalt from Low-Grade Ni–Cu Sulfide Tailings

Recovery of Pure Co(II) and Ni(II) Solutions from Synthetic Sulfate Leach Liquor of Laterite Ores by Precipitation and Solvent Extraction

Purification of nickel solution obtained from leaching of Ni–Mo ore by chemical precipitation

Recovery of Arsenic from Arsenic-Bearing Cobalt/Nickel Residue Using Sodium Persulfate

Recovery of Copper and Cobalt from Low-Grade Heterogenite with Reductive Acid Leaching Method

Advanced Purification Process for Cobalt Sulphate Solution

Cobalt Recovery from Lithium-ion Battery by Ion-exchange Method

A Method for Extracting Valuable Metals from Low Nickel Matte by Non-Oxidative Leaching with H2SO4

Removal of Ni(II) from strongly acidic wastewater by chelating precipitation and recovery of NiO from the precipitates

Extraction and Separation of Nickel and Cobalt from Saprolite Laterite Ore by Microwave-Assisted Hydrothermal Leaching and Chemical Deposition

Solvent Extraction and Purification of Acid Leach Liquor of Metalliferous Black Shale Smelter Slag and Preparation of NiO Powder

Comprehensive Recovery of Ni-Co from Low Grade Manganese Oxide Ore

Simultaneous dissolution of nickel, copper and cobalt from low grade nickel matte by (NH4)2S2O8-H2SO4 oxidative leaching

Leaching of Nickel and Cobalt from a Mixed Nickel-Cobalt Hydroxide Precipitate Using Organic Acids

Recovery of Nickel and Cobalt Metal Powders from the Leaching Solution of Spent Lithium-Ion Battery by Solvent Extraction and Chemical Reduction

Optimizing the Leaching Parameters and Studying the Kinetics of Nickel and Cobalt Recovery from Xinjiang Nickel–Cobalt Slag

A new method for recovering valuable metals from low-grade nickeliferous oxide ores

Recovery of Cobalt, Nickel and Copper from Nickel Converter Slag by Reduction-sulfurization Process

Separation of Co(II) and Ni(II) from Hydrochloric Acid Leach Liquor by Solvent Extraction and Crystallization