Abstract:It is shown that the size effect recently observed by Espinosa et al., [J. Mech. Phys. Solids51, 47 (2003)] in pure tension tests on free thin metallic films can be explained by the existence of a boundary layer of fixed thickness, located at the surface of the film that was attached onto the substrate during deposition. The boundary layer is influenced by the epitaxial effects of crystal growth on the dislocation density and texture (manifested by prevalent crystal plane orientations). This influence is assumed to cause significantly elevated yield strength. Furthermore, the observed gradual postpeak softening, along with its size independence, which is observed in short film strips subjected to pure tension, is explained by slip localization, originating at notch-like defects, and by damage, which can propagate in a stable manner when the film strip under pure tension is sufficiently thin and short. For general applications, the present epitaxially influenced boundary layer model may be combined with the classical strain-gradient plasticity proposed by Gao et al., [J. Mech. Phys. Solids 47, 1239 (1999)], and it is shown that this combination is necessary to fit the test data on both pure tension and bending of thin films by one and the same theory. To deal with films having different crystal grain sizes, the Hall–Petch relation for the yield strength dependence on the grain size needs to be incorporated into the combined theory. For very thin films, in which a flattened grain fills the whole film thickness, the Hall–Petch relation needs a cutoff, and the asymptotic increase of yield strength with diminishing film thickness is then described by the extension of Nix’s model of misfit dislocations by Zhang and Zhou [J. Adv. Mater. 38, 51 (2002)]. The final result is a proposal of a general theory for strength, size effect, hardening, and softening of thin metallic films.

The Critical Layer Number of Stranski–Krastanov Growth Mode Epitaxial Growth for Bcc Metallic Thin Films

The critical layer number of epitaxially grown Cu and Ni films with strained structure

CRITICAL THICKNESS OF EPITAXIAL GROWN SEMICONDUCTOR FILMS WITH STRAINED STRUCTURE

Critical Misfit of Epitaxial Growth Metallic Thin Films

A Numerical Study of Stress Controlled Surface Diffusion During Epitaxial Film Growth

Computer Simulations of the Stranski–Krastanov Growth of Heteroepitaxial Films with Elastic Anisotropy

"Electronic Growth" of Metallic Overlayers on Semiconductor Substrates

Epitaxially Influenced Boundary Layer Model for Size Effect in Thin Metallic Films

THE GROWTH SIMULATION OF ABO3 TYPE EPITAXIAL THIN FILMS

Theory of Abnormal Grain Growth in Thin Films and Analysis of Energy Anisotropy

Thickness Dependent Phase Stability of Epitaxial Metal Films

Surfactant-mediated Layer-by-layer Homoepitaxial Growth Ofcu/in/cu(100)and

Elastic Mechanical Behavior of Nano-Scaled FGM Films Incorporating Surface Energies

Critical Layer Thickness in Stranski-Krastanow Growth of Ge on Si(001)

Homologous Temperature Dependence of Global Surface Scaling Behaviors of Polycrystalline Copper Films

Derivation of a Continuum Model for Epitaxial Growth with Elasticity on Vicinal Surface.

Layer-by-layer growth, apparent instability, and mound coarsening in thin film deposition controlled by thermally activated surface diffusion

Growth Instability of Strained Film: An Elastic Green’s Function Force Monopole Approach

Continuum Modeling of Surface Roughening in Heteroepitaxial Structures Based on Phase Field Theory

A Theoretical Study of Surfactant Action in the Layer-by-layer Homoepitaxial Growth of Metals: the Case of in on Cu(111)

Theoretical analysis of strain energy-driven abnormal grain growth in metallic films with hcp ((c/a) < 1.633) structure on rigid substrates