Abstract:An automated microfluidic sequential injection analysis system that efficiently manipulates sample and reagent solutions in the nanoliter range in approximately 10 s per analytical cycle is described. The system consisted of a 6-cm-long, typically 75-microm i.d., fused-silica capillary (which functioned as a sampling probe and reactor as well as a flow-through detection cell), a horizontally oriented waste reservoir that provided liquid level differences for inducing gravity-driven flows, an autosampling device holding samples and reagents with horizontally fixed slotted microvials, and a laser-induced fluorescence detection system. Sample and reagent zones were sequentially introduced via gravity-driven flow by scanning the capillary tip (functioning as the sampling probe) through the vial slots, while vials containing sample, reagent, and carrier were sequentially rotated to the probe by programmed movement of the vial holders. Sequentially injected nanoliter zones were rapidly mixed by convection and diffusion within the carrier flow, demonstrating a behavior that conformed well to the Taylor dispersion model, and zone penetration effects were characterized and optimized under Taylor's dispersion theory guidelines. For the determination of fluorescein, a high throughput of 400 h(-1) was achieved, rapidly producing calibration curves (five points) within 45 s. Owing to its adaptability to the Taylor's dispersion model, the system was used also for measuring diffusion coefficients of fluorescent species. Potentials for using the system in enzyme inhibition assays were demonstrated by a reaction involving the conversion of fluorescein digalactoside to fluorescent hydrolysates via beta-galactosidase and the inhibition of beta-galactosidase by diethylenetriaminepentaacetic acid.

An Enrichment Method for Bio-Samples Based on Circular Injection on A Microfluidic Chip

Rapid and Simple Half-Quantitative Measurement Alpha-Fetoprotein by Poly(dimethylsiloxane) Microfluidic Chip Immunochromatographic Assay

Fabrication of Micro/Nanofluidic Chip on Glass Substrate and Its Application for Electrokinetic Concentration of Proteins

Negative Pressure Pinched Sample Injection for Microchip-Based Electrophoresis.

On-chip procedures for magnetic particle-based assay in droplets

A SANDWICH-INJECTION METHOD FOR MICROCHIP ELECTROPHORESIS

Sequential injection sample introduction microfluidic-chip based capillary electrophoresis system

Microfluidic Sequential Injection Analysis in a Short Capillary

A Microfluidic Chip Based Sequential Injection System with Trapped Droplet Liquid-Liquid Extraction and Chemiluminescence Detection

Droplet-based microfluidic flow injection system with large-scale concentration gradient by a single nanoliter-scale injection for enzyme inhibition assay.

Rapid Protein Concentration, Efficient Fluorescence Labeling and Purification on A Micro/Nanofluidics Chip

On-chip Immuno-Agglutination Assay Based on a Dynamic Magnetic Bead Clump and a Sheath-Less Flow Cytometry.

Improvements on the electrokinetic injection technique for microfluidic chips

A Microfluidic Immunoassay System on a Centrifugal Platform

Automated Droplet Ejection from a Digital Microfluidics Sample Pretreatment Device Enables Batch-Mode Chemiluminescence Immunoassay

A High-Throughput Continuous Sample Introduction Interface for Microfluidic Chip-Based Capillary Electrophoresis Systems.

Further Improvement of Hydrostatic Pressure Sample Injection for Microchip Electrophoresis

A polymer-based microfluidic device for immunosensing biochips

Acupuncture injection for field amplified sample stacking and glass microchip-based capillary gel electrophoresis

A Microchip Device to Enhance Free Flow Electrophoresis Using Controllable Pinched Sample Injections

Improved hydrostatic pressure sample injection by tilting the microchip towards the disposable miniaturized CE device.