Abstract:Time-to-digital converters (TDCs) act as a core component in many timing-critical systems. Tapped delay line is the most widely used style for the field-programmable gate-array (FPGA)-based TDCs, but it suffers from several intractable problems such as poor nonlinearity and long delay-line occupation. Recently, a new ring-oscillator-based Vernier TDC circuit using carry chains was demonstrated to have much smaller nonlinearity with a much shorter delay line. Since the used delay line is not compensated, the timing jitter increases (or the precision degrades) remarkably when the oscillation number is large. This would incur undesirable lower resolution selection to maintain acceptable precision. In this article, a novel bidirectional-operating Vernier delay line structure is proposed to reduce the required oscillation number during the fine time measurement. Traditionally, for the Vernier delay line, the fast signal propagates along the slow delay line, while the slow signal propagates along the fast delay line, to which we call the normal Vernier delay line. The new structure proposes two parallelized Vernier delay line, consisting of one normal Vernier delay line and another abnormal Vernier delay line. The term "abnormal" refers to that the fast and slow signals are unusually fed to the fast and slow delay lines, respectively. A prototype TDC circuit based on this new method was implemented on a Stratix III FPGA. Test results demonstrate that by adopting the proposed novel circuit architecture, both the resolution and the root-mean-square error can be improved from the 30–40-ps level to the 20–30-ps level.

Research on Coincidence of Vernier Clock Based on Digital Circuits

Effect on Pseudo Code Ranging Precision by A/D Sampling Clock Jitter

Integrated Method for Measuring Distance and Time Difference Between Small Satellites

A Vernier Clock Generation Method Based On Dds Technique

New Design of Clock Self Recovery Circuit Based on Time-to-voltage Conversion

A New Time-Digital Convert Circuit Based on Digital Delay Line

A High-Throughput Vernier Time-to-Digital Converter on FPGAs with Improved Resolution Using a Bi-Time Interpolation Scheme

Design of Multifunction Digital Clock Based on FPGA

A Jitter Measurement Circuit Based On Dual Resolution Vernier Oscillator

A Vernier Time-to-Digital Converter with 1.5ps Resolution for an All-Digital Phase Locked Loop in 28nm CMOS.

A High Precision and Low Power Digital Synchronous Clock for Sensor Network

Two-Stage Clock-Free Time-to-Digital Converter Based on Vernier and Tapped Delay Lines in FPGA Device

Research on Pulsed Laser Rangefinding Dual-Threshold Timing Idscriminating Technology

Design of Data Acquisition System and Research on Interpolation Algorithm in Digital Oscillometer

A Integral Detecting Method in Mid-frequency Difference Heterodyne Signal Processing

Comparison and Testing of Multi-clock Synchronization Methods

A High-Precision Coarse-Fine Time-to-digital Converter with the Analog-Digital Hybrid Interpolation

A Digital Background Calibration Circuit for Coarse-Fine Timing Mismatch in VCO-Based ADCs

A High-Linearity Vernier Time-to-Digital Converter on FPGAs With Improved Resolution Using Bidirectional-Operating Vernier Delay Lines

Design of Measuring Secondary Voltage Drop Based on Distributed Synchronizing Clock

A Time Difference Measurement and Clock Synchronization Technology Based on Interpolating Sampling