Abstract:Cohesive zone models have been widely used to model interface crack initiation and propagation both in single-material media and bi-material systems. For single-material media with cohesive elements inserted into interface among segments, in order to ensure that the introduction of interface cohesive zone models does not affect the mechanical properties of single-material media before the softening stage of cohesive zone models, a selection criterion of stiffness of cohesive elements is proposed theoretically firstly based on the properties’ equivalence. Taking the softening stage into account, the mechanical responses of the overall stress-strain relationship of single-material media, for the cases of stable increase of strain and snap-back instability of strain, are both obtained, and the related energy mechanism are investigated. For bi-material systems with cohesive elements at interface between two materials, the thickness-dependent failure characteristics of systems in uniaxial tension are found, which is attributed to the difference of the releasing rate of elastic strain energy in the materials with different thicknesses. Furthermore, as a more complex application of cohesive elements, based on the selection criterion proposed, failure behaviors of the ceramic coating/substrate systems under three-point bending are modeled by finite element method and inserting cohesive elements into the coating segments and the coating/substrate interface simultaneously. The simulation results indicate the transition of dominated failure mode from coating cracking to interface delamination with increasing coating thickness, and show faster damage of thick coating systems, agreeing with experimental results. The effects of interface strength and toughness of cohesive elements on failure are also revealed. These results can provide guidance for the application of cohesive elements, and help us better understand the overall failure behaviors of interface systems.

Finite Element Analysis of Contact Induced Adhesion Failure in Multilayer Coatings with Weak Interfaces

An elastic-plastic cohesive zone model for metal-ceramic interfaces at finite deformations

Experimental and Modelling Techniques for Assessing the Adhesion of Very Thin Coatings on Glass

Failure Characterization of Solid Structures Based on an Equivalence of Cohesive Zone Model

Numerical Study on Interfacial Delamination of Thermal Barrier Coatings with Multiple Separations

A Cohesive-Zone-Based Contact Mechanics Analysis of Delamination in Homogeneous and Layered Half-Spaces Subjected to Normal and Shear Surface Tractions

Influences of Interface Properties and Coating Thickness on Fracture Behaviors of Coating/substrate Systems

Numerical simulation of interfacial delamination of PZT thin films by cohesive zone models

Delamination Analysis of Laminated Composites Based on Contact

Adhesion and debonding of multi-layer thin film structures

Numerical Investigation on the Loading-Delamination-unloading Behavior of Adhesive Joints

Approaches to Investigate Delamination and Interfacial Toughness in Coated Systems: an Overview

Cohesive Zone Modeling of Interfacial Delamination in Pzt Thin Films

Numerical study of thermomechanical delamination mechanisms in segmented high-temperature coatings

Fracture of Thermal Barrier Coating with Multiple Surface Cracks and Delaminations: Interlayer Effect

ELASTO-PLASTIC COHESIVE ZONE MODELING OF DELAMINATION OF Si/Cu INTERFACE IN A NANO-CANTILEVER

Interfacial stress analysis for multi-coating systems using an advanced boundary element method

Frictional Adhesive Contact of Multiferroic Coatings Based on the Hybrid Element Method

Interfacial fatigue limit as measure of cyclic bonding strength of hard coatings

Finite Element Analysis of the Influence of Cohesive Law Parameters on the Multiple Delamination Behaviors of Composites under Compression

Finite Element Simulation and Analysis of Nano-Scale Adhesive Contacts