Abstract:Two models for quasistatic adhesive unilateral contact delaminating in mixed fracture mode, i.e. distinguishing the less-dissipative Mode I (opening) from the more-dissipative Mode II (shearing), and allowing rigorous mathematical and numerical analysis, are studied. One model, referred to as Associative Plasticity-based Rate-Independent Model (APRIM), works for purely elastic bodies and involves, in addition to an interface damage variable, an auxiliary variable (representing interfacial plastic slip) to provide a fracture-mode sensitivity. It relies on a particular concept of force-driven local solutions (given by either vanishing-viscosity concept or maximum-dissipation principle). The other model, referred to as Linear Elastic - (perfectly) Brittle Interface Model (LEBIM), works visco-elastic bodies and rely on a conventional concept of weak solution and needs no auxiliary interfacial variable. This model is directly related to a usual phenomenological model of interface fracture by Hutchinson and Suo used in engineering. This paper devises a way how the phenomenology of the LEBIM can be fit to imitate the APRIM under relatively very slow loading, where both models are essentially rate-independent. The so-called effective dissipated energy is partitioned in both formulations to the surface energy and the energy dissipated during the interface debonding process, where the former is independent and the latter dependent on the fracture mode mixity. A numerical comparison of these models, implemented in a Boundary Element Method (BEM) code, is carried out on a suitable two-dimensional example. Furthermore, the computational efficiency and behaviour of the LEBIM is illustrated on another geometrically more complicated numerical example.

Numerical Investigation on the Loading-Delamination-unloading Behavior of Adhesive Joints

Viscoelastic Bilinear Cohesive Model and Parameter Identification for Failure Analysis of Adhesive Composite Joints

An elastic-plastic cohesive zone model for metal-ceramic interfaces at finite deformations

Modeling the Interfacial De-Bonding Behavior Between Steel Wire and Adhesive

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

A Cohesive-Zone-Based Contact Mechanics Analysis of Delamination in Homogeneous and Layered Half-Spaces Subjected to Normal and Shear Surface Tractions

Two adhesive-contact models for quasistatic mixed-mode delamination problems

Finite Element Analysis of the Influence of Cohesive Law Parameters on the Multiple Delamination Behaviors of Composites under Compression

Delamination Analysis of Carbon Fiber/Epoxy Composite Laminates under Different Loading Rates Using Acoustic Emission

Numerical and Experimental Analysis of Delamination in the T-Stiffener Integrated Composite Structure

Irreversible Deformation of Metal Matrix Composites: A Study Via the Mechanism-Based Cohesive Zone Model

Post-Buckling Response of Carbon/Epoxy Laminates with Delamination under Quasi-Static Compression: Experiments and Numerical Simulations

Numerical study of thermomechanical delamination mechanisms in segmented high-temperature coatings

Delamination prediction in composite laminates under low-velocity impact

Interfacial debonding in a thin plate bonded to a rigid substrate with a circular hole

Influence of Failure-Load Prediction in Composite Single-Lap Joints with Brittle and Ductile Adhesives Using Different Progressive-Damage Techniques

Influence of Loading Rate on the Cohesive Traction for Soft, Rubber-like Adhesive Layers Loaded in Modes I and III

Modeling of Meso-Sliding And/or Delamination at Inclusion Interface

Investigation of the out-of-plane load-bearing capacity of T1100/5405 composite T-stiffened panels

Effect of Interfacial Slippage in Peel Test: Theoretical Model.

Application of a delamination model to laminated composite structures