Abstract:A quasi-continuous-wave (QCW) laser diode (LD) driver is commonly used to drive diode bars and stacks designed specifically for QCW operations in solid-state lasers. Such drivers are optimized to deliver peak current and voltage pulses to LDs while maintaining low average power levels. As a result, they are widely used in laser processing devices and laser instruments. Traditional high-energy QCW LD drivers primarily use capacitors as energy storage components and pulsed constant-current sources with op-amps and power metal-oxide-semiconductor field-effect transistors (MOSFETs) as their core circuits for generating repeated constant-current pulses. The drawback of this type of driver is that the driver's output voltage needs to be manually adjusted according to the operating voltage of the load before use to maximize driver efficiency while providing a sufficient current. Another drawback is its inability to automatically adjust the output voltage to maintain high efficiency when the load changes during the driver operation. Drastic changes in the load can cause the driver to fail to function properly in extreme cases. Based on the above traditional circuit structure, this study designed a stability compensation circuit and realized a QCW LD driver for driving a GS20 diode stack with a maximum repetition rate of 100 Hz, a constant current of approximately 300 A, a load voltage of approximately 10 V, and a pulse width of approximately 300 μs. In particular, a high-efficiency, load-adaptive driving method was used with the MOSFETs in the critical saturation region (i.e., between the linear and saturated regions), controlling its power loss effectively while achieving maximum output current of the driver. The experiments demonstrated that the driver efficiency could be maintained at more than 80% when the load current varied from 50 to 300 A.

A 1.25 Gbps Dc-Coupled Laser Diode Driver with V-Be Compensation Technique

200 Gb/s Optical-Amplifier-Free IM/DD Transmissions Using a Directly Modulated O-Band DFB+R Laser Targeting LR Applications

A 32Gb/s-NRZ, 15GBaud/s-PAM4 DFB laser driver with active back-termination in 65nm CMOS

DC～3 Gb/s LD/EA Drivers Using Discrete Double Polysilicon Bipolar Transistors

A Kind of High Bit Rate Laser Diodes Driver

A Load-Adaptive Driving Method for a Quasi-Continuous-Wave Laser Diode

2.5Gb/s 1.55 μm InGaAsP/InP DFB laser/electroabsorption modulator integrated device

A laser source driver in 0.18 μm SiGe BiCMOS technology for high speed quantum key distribution

10Gb/s Direct Modulation of Widely Tunable V-Cavity-Laser with Chirp Managed Laser Technology

A laser source driver in 0.18 <i></i>m SiGe BiCMOS technology for high speed quantum key distribution

A 4-Channel 10-Gbps/ch CMOS VCSEL Array Driver with on-chip Charge-pumps

Design and Implementation of a Power Semiconductor-Based Switching Mode Laser Diode Driver

Tunable V-Cavity Semiconductor Laser And Modules

A 16gb/s Triple-Mode Driver in 0.18μm CMOS Technology

InP-based monolithic integration of 1.55 um MQW laser diode and HBT driver circuit

2.5 Gb/s Electroabsorption Modulator Integrated with Partially Gain-Coupled Distributed Feedback Laser Fabricated Using a Very Simple Device Structure

Design of LD Current Drivers of Pump-Modules in Fiber Amplifiers

A Novel Quad-Channel 10 Gbps CMOS VCSEL Array Driver with Integrated Charge Pumps

LOCld65, A Dual-Channel VCSEL Driver ASIC For Detector Front-End Readout

A High-Speed 130-nm SiGe BiCMOS Integrated Duobinary Driver for Data Rate Capacity Enhancement in VCSEL-Based Optical Links