Abstract:High-performance (Ti, Nb)B/Ti2AlNb composites are promising high-temperature structural materials for the new generation of aerospace engines. The interfaces between the (Ti, Nb)B reinforcement and matrix phases (i.e. O-Ti2AlNb, α2-Ti3Al and B2 phases) affect the mechanical properties of the composites largely. In this study, the properties of the interfaces were systematically revealed after fabricating a (Ti, Nb)B/Ti2AlNb composite by low-energy ball-milling and spark plasma sintering (SPS). A high-resolution transmission electron microscopy (HRTEM) was adopted to evaluate the crystallographic orientation relationships (ORs) and interfacial structures. (Ti, Nb)B maintains three coherent interfaces with the matrix, and the preferred ORs between them can be expressed as [1 1 <math>2¯</math> 0]α2//[0 1 0](Ti, Nb)B and (<math>1¯</math> 1 0 0)α2//(1 0 0)(Ti, Nb)B; [1 <math>1¯</math> 0]O//[0 1 0](Ti, Nb)B and (1 1 0)O//(1 0 0)(Ti, Nb)B; [1 <math>1¯</math> 1]B2//[0 1 0](Ti, Nb)B and (<math>1¯</math> 1 2)B2//(1 0 0)(Ti, Nb)B. The results of first-principles calculations indicated that the (<math>1¯</math> 1 0 0)α2/(1 0 0)(Ti, Nb)B interface possesses a higher bonding strength compared with the (1 1 0)O/(1 0 0)(Ti, Nb)B and (<math>1¯</math> 1 2)B2/(1 0 0)(Ti, Nb)B interfaces, and the (Ti, Nb)B reinforcement and the matrix are bonded through strong ionic bonds and weak covalent bonds. Moreover, based on Bramfitt's lattice mismatch theory, it was found that the (Ti, Nb)B reinforcement acts as an effective substrate in promoting the heterogeneous nucleation and preferred precipitation of the α2 phase. Suppressing the brittle α2 precipitate around the reinforcement improves the ductility of the composite obviously.

The Orientation Relationship Between TiB and RE2O3 in in Situ Synthesized Titanium Matrix Composites

In Situ Synthesis of Hybrid-Reinforced Titanium Matrix Composites

Study on In Situ Synthesized Titanium Matrix Composites

Microstructural Characterization of Nd2O3 in in Situ Synthesized Multiple-Reinforced (tib + TiC + Nd2O3)/Ti Composites

Growth Mechanism of in Situ Synthesized TiBw in Titanium Matrix Composites Prepared by Common Casting Technique

In Situ Preparation of Titanium Matrix Composites Reinforced by TiB and Nd2O3

Crystallographic orientation relationships and interfacial structures between reinforcement and matrix phases in an in situ (Ti, Nb)B/Ti2AlNb composite

In situ synthesis of hybrid and multiple-dimensioned titanium matrix composites

In situ synthesized (TiB + Y 2 O 3 )/Ti composites

Microstructural Characterization of Y2o3 in in Situ Synthesized Titanium Matrix Composites

A Model to Predict the Preferred Orientation Relationships of in Situ Synthesized TiB in Titanium Matrix Composites

On the Orientation Relationship Between A2precipitates and the B2 Phase in a Ti-47at.%Al-2at.%W-0.5at.%Si Alloy

In Situ Preparation of (tib + TiC + Nd2O3)/Ti Composites by Powder Metallurgy

In-situ Synthesis of Multiple Ceramic Particulates Reinforced Titanium Matrix Composites (tib + TiC + Y2O3 )/Ti

Design, fabrication and mechanical properties of in situ synthesized titanium matrix composites

Solidification Paths and Reinforcement Morphologies in Melt-Processed (tib + TiC)/Ti in Situ Composites

In Situ Preparation Of Titanium Matrix Composites Reinforced With Tib Whiskers Andy(2)O(3) Particles

An investigation on grain refinement mechanism of TiB2 particulate reinforced AZ91 composites and its effect on mechanical properties

Oxidation Behavior of in Situ Synthesized (tic+tib+nd2o3)/ti Composites

Oxidation Behavior Of In Situ Synthesized Tib/Ti Composite In Air Environment