Abstract:High Curie temperature (TC) xBi(Ni1/2Ti1/2)O3-(1-x)Pb(Zr1/2Ti1/2)O3 (xBNT-(1-x)PZT, BNT-PZT) piezoelectric ceramics were prepared by the conventional ceramic processing. The composition-induced morphotropic phase boundary (MPB) and its influences on structure and electrical performance were investigated. The synthesized BNT-PZT ceramics exhibit rather pure perovskite structure, and densified microstructure morphology with uniform elementals distribution in both grains and grain boundaries. With increasing the content of Bi(Ni1/2Ti1/2)O3 (BNT), crystal structure of the BNT-PZT ceramics transform from tetragonal phase to rhombohedral phase, and dielectric response peaks change from narrow shape to very broad shape but all presenting dielectric frequency dispersion. The diffused and relaxation dielectric behavior can be fitted well by the quadratic law, and the Vogel-Fulcher law fitting provides additional information on the relaxation characteristic. The MPB effects are confirmed further by ferroelectric and piezoelectric properties measurements. High-TC combined with excellent piezoelectric performance can be realized in the BNT-PZT system, which presents promising applications in geothermal exploration, aerospace and related elevated temperatures fields.

Preparation and Characterization of (1-x)BiScO<sub>3</sub>-xPbTiO<sub>3</sub> Ceramics by Two-Step Sintering

Preparation and Characterization of (1-x)BiScO3-xPbTiO3 Ceramics by Two-Step Sintering

Preparation and Characterization of (1-X)bisco<sub>3</sub>-xpbtio<sub>3</sub> Ceramics by Two-Step Sintering

Preparation and Properties of Fine‐Grain (1−x)bisco3−xpbtio3 Ceramics by Two‐Step Sintering

Bulk Dense Fine-Grain (1−x)bisco3–xpbtio3 Ceramics with High Piezoelectric Coefficient

Facile Preparation and Performance of Novel High-Tc Xbi(ni1/2ti1/2)o3-(1-x)pb(zr1/2ti1/2)o3 Piezoceramics

Enhanced low electric-field energy-storage performance in Ba0.9Sr0.1TiO3-Bi(Mg1/2Ti1/2)O-3 ceramics

Structure, Dielectric Behaviours, Enhanced Polarization Responses and Energy Storage Properties in (1 − X )srtio 3 – X Bi(Mg 1/2 Ti 1/2 )O 3 Ceramics

Structure and properties of Bi2O3 doped Bi(Mg1/2Ti1/2)O3-0.38PbTiO3 ceramics with MPB composition

Microstructures and Pyroelectric Properties of Multicomposition 0.9PbZrO<sub>3</sub>·<i>x</i>PbTiO<sub>3</sub>·(0.1−<i>x</i>)Pb(Zn<sub>1/3</sub>Nb<sub>2/3</sub>)O<sub>3</sub>Ceramics

Microstructures And Pyroelectric Properties Of Multicomposition 0.9pbzro(3)Center Dot Xpbtio(3)Center Dot(0.1-X)Pb(Zn1/3nb2/3)O-3 Ceramics

Pyroelectric Ceramics in PbZrO<sub>3</sub>-PbTiO<sub>3</sub>-Pb(Zn<sub>1/3</sub>Nb<sub>2/3</sub>)O<sub>3</sub> System Prepared with Spark Plasma Sintering Technique

The Effect of B2o3-Li2co3 Addition on Sintering Behavior and Dielectric Properties of Ba0.6sr0.4tio3 Ceramics

Pyroelectric Ceramics In Pbzro3-Pbtio3-Pb(Zn1/3nb2/3)O-3 System Prepared With Spark Plasma Sintering Technique

Effects of Nano-Sized In2O3on Sintering Behavior and Electrical Properties of 0.28Pb(in1/2nb1/2)o3-0.40Pb(mg1/3< /Sub>nb2/3)o3-0.32Pbtio3ceramics

Phase evolution and thermal stability of high Curie temperature BiScO$_3$-PbTiO$_3$-Pb(Cd${1/3}$Nb$_{2/3}$)O$_3$ ceramics near MPB

Effect of Gel-Calcination on Piezoelectric Property in (1-X)bisco3-xpbtio3 Ferroelectrics

Grain boundary region and local piezoelectric response of BiScO 3 –PbTiO 3 nanoceramics prepared by combination of SPS and two-step sintering

Effect Of Gel-Calcination On Piezoelectric Property In (1-X)Bisco3-Xpbtio(3) Ferroelectrics

Effects of LiNbO3 Doping on the Microstructures and Electrical Properties of BiScO3–PbTiO3 Piezoelectric System

Dielectric and Piezoelectric Properties of BiScO3-PbTiO3 Piezoelectric Ceramics with High Curie Temperature