Abstract:This paper reports enhanced high-temperature piezoelectric properties of Bi(Zn 0.5 Ti 0.5 )O 3 -modified BiFeO 3 -BaTiO 3 (BF–BT- x BZT) ceramics prepared by two-step sintering method. The resultant ceramics show a symmetrical transition from a rhombohedral–pseudo-cubic ( R-PC ) phase coexistence to main PC phase with the increase of x , whose R-PC fraction (C R /C PC ) is 53.3/46.7, 52.9/47.1, 50.2/49.8, 27.4/72.6, 15.3/84.7 when x = 0, 0.005, 0.01, 0.03, 0.05, respectively. The modification of BZT inhibits the grain growth, reduces the leakage current and gradually drives ferroelectric to relaxor transition. Optimal piezoelectric properties: d 33 = 193 pC N −1 , P r = 20.6 μC cm −2 , T C = 503 °C and k p = 36% achieved at x = 0.01 composition, which is due to the synergistic effect of an appropriate C R /C PC ratio, improved insulation and good polarization performance. In addition, the depolarization temperature T d is close 280–312 °C, and the high-temperature d 33 further increases to 286–347 pC N −1 , which shows a good application prospect of lead-free piezoceramics at high temperature. Our work also confirms that the addition of (Zn 0.5 Ti 0.5 ) 3+ and two-step sintering method are an effective and convenient strategy to improve the high-temperature electrical performance of BiFeO 3 –BaTiO 3 based lead-free ceramics.

Effect of Gel-Calcination on Piezoelectric Property in (1-X)bisco3-xpbtio3 Ferroelectrics

Effect Of Gel-Calcination On Piezoelectric Property In (1-X)Bisco3-Xpbtio(3) Ferroelectrics

Facile Preparation and Performance of Novel High-Tc Xbi(ni1/2ti1/2)o3-(1-x)pb(zr1/2ti1/2)o3 Piezoceramics

Bulk Dense Fine-Grain (1−x)bisco3–xpbtio3 Ceramics with High Piezoelectric Coefficient

Preparation and Characterization of (1-X)bisco<sub>3</sub>-xpbtio<sub>3</sub> Ceramics by Two-Step Sintering

Preparation and Properties of Fine‐Grain (1−x)bisco3−xpbtio3 Ceramics by Two‐Step Sintering

Composition Designing and Sintering Behavior Tailoring in [(ba1−xcax)0.995eu0.005](ti1−yhfy)o3 Multifunctional Piezoceramics

Enhancing Electrical Properties of High-Curie Temperature Piezoelectric Ceramics BNT-PZT and Their Mechanism

Effect of Different Sintering Temperatures on the Electrical Properties of SBTi Ferroelectric Ceramics

Fabrication and Characterization of High Curie Temperature BiSc1/2Fe1/2O3–PbTiO3 Piezoelectric Films by a Sol–gel Process

Effects of Sintering Temperature and Poling Conditions on the Electrical Properties of Ba0.70Ca0.30TiO3 Diphasic Piezoelectric Ceramics

Preparation and Characterization of (1-x)BiScO<sub>3</sub>-xPbTiO<sub>3</sub> Ceramics by Two-Step Sintering

Preparation and Characterization of (1-x)BiScO3-xPbTiO3 Ceramics by Two-Step Sintering

Enhanced Piezoelectricity in Broad Composition Range and the Temperature Dependence Research of (ba1−xcax)(ti0.95sn0.05)o3 Piezoceramics

Effect of processing temperature on structural and electrical properties of lead-free K0.5Bi0.5TiO3 piezoelectric ceramics synthesized by sol-gel technique

Grain boundary region and local piezoelectric response of BiScO 3 –PbTiO 3 nanoceramics prepared by combination of SPS and two-step sintering

Phase evolution and thermal stability of high Curie temperature BiScO$_3$-PbTiO$_3$-Pb(Cd${1/3}$Nb$_{2/3}$)O$_3$ ceramics near MPB

Investigation of BiFeO3-BaTiO3 Lead-Free Piezoelectric Ceramics with Nonstoichiometric Bismuth

Dielectric and Piezoelectric Properties of BiScO3-PbTiO3 Piezoelectric Ceramics with High Curie Temperature

Properties of Ultrafine High Curie Temperature (1-X)bisco3-xpbtio3 Ferroelectric Ceramics

Enhanced high-temperature piezoelectric properties of Bi(Zn0.5Ti0.5)O3-modified BiFeO3–BaTiO3 ceramics