Abstract:Despite being an old detector concept, position-sensitive parallel-plate avalanche counters (PPACs) remain widely used today for heavy-ion position and timing measurements. In modern rare isotope beam facilities and large-acceptance fragment separators, PPACs are used to characterize beam properties (diagnostics), facilitate beam delivery (tuning), and provide event-by-event beam tracking for particle identification (PID). Most popular particle localization methods in PPAC detectors are based on strip electrodes electrically connected to resistive-chain circuits or delay lines. More exotic systems include optical readouts based on recording electroluminescence light with high-granularity photodetector arrays or high-resolution resistive anode electrodes. PPACs with conventional resistive-chain or delay-line readouts achieve typical position and time resolutions of below 1 mm ( σ ) and around 150 ps ( σ ), respectively. In addition, delay-line systems are capable of counting rates above several hundred kHz for beam areas of a few millimeters square, and around 1 MHz for larger beam sizes. Resistive-chain readouts have limited rates of a few tens of kHz. A review of the operation principles and performance of PPAC detectors is presented in this paper. We will discuss decades-long experience building and operating PPACs developed at the National Superconducting Cyclotron Laboratory, and then refined at the Facility for Rare Isotope Beams (FRIB), mostly focusing on the delay-line readout technique (DLPPAC). We will also discuss problems that arise due to electric discharges at high rates and briefly describe ongoing developments at FRIB. https://doi.org/10.1103/PhysRevAccelBeams.27.044801 Published by the American Physical Society under the terms of the Creative Commons Attribution 4.0 International license. Further distribution of this work must maintain attribution to the author(s) and the published article's title, journal citation, and DOI. Published by the American Physical Society

Efficiency of Position Sensitive PPAC for Various Ions

A Large Position-sensitive PPAC

Development of Parallel Plate Avalanche Counter for Heavy Ion Collision in Radioactive Ion Beam

Development of fast-response PPAC with strip-readout for heavy-ion beams

Performance Test of PPAC in Different Gases

Development of a Parallel-Plate Avalanche Counter with Optical Readout (O-PPAC)

Parallel-plate avalanche counters for heavy-ion beam tracking: History and mysteries

The development of segmented electrode thin-film parallel plate avalanche counter (PPAC)

Remarks on Ion Generation for Cpc Detection Efficiency Studies in Sub-3-Nm Size Range

Development of high position resolution parallel plate avalanche chambers

An MPPC alpha detection performance comparison study by two different scintillators

Research on Detection Efficiency of Imaging Plates for Alpha Particles Using Two Types of Imaging Plate

Absolute ion detection efficiencies of microchannel plates and funnel microchannel plates for multi-coincidence detection

Application of position sensitive detector for the electron detachment cross-sections measurement

Detection efficiency evaluation for a large area neutron sensitive microchannel plate detector

Efficiency Measurement of NaI(Tl) Detector for a Long Tube Volume Source of 6.13mev Gamma-Ray

IonCCD™ for direct position-sensitive charged-particle detection: from electrons and keV ions to hyperthermal biomolecular ions

Highly sensitive single-molecule detection in slow protein ion beams

Sensitivity of charged particle activation analysis for long-lived radioactive nuclide determination

Rate capability and magnetic field tolerance measurements of fast timing microchannel plate photodetectors

Design and performance study of a proportional counter for low-energy X-rays