Abstract:The Al63Cu25Fe9Cr3 quasicrystalline was prepared by conventional casting method. The microstructures and phase composition of Al63Cu25Fe12 quasi-crystalline and Al65Cu20Fe10Cr5 phases were characterized by XRD and SEM. Aluminium based composites was fabricated by using the Al63Cu25Fe9Cr3 quasicrystalline particles as the reinforcing phase and ZL101 as matrix with mechanical stirring. The effects of quasicrystals content, on the microstructure and mechanical properties of the obtained composite, were investigated. The results show that the as-cast quasicrystalline material is composed of d-phase(Al65Cu20Fe10Cr5), I-phase(Al63Cu25Fe12), lambda-Al3Fe, beta-AlFe3 and a small amount of eta-AlCu, theta-Al2Cu phases. After heat treatment, the quasicrystalline intermediate alloy composition tends to quasicrystal phase. In the composite material, the diffusion between the quasicrystalline and the matrix alloy caused the decomposition of the structure of quasicrystalline phase. With the increase of quasicrystalline content, the tensile strength of the composites increases. However, addition of the Cr element changes the acicular beta-Fe(Al80-85Fe6-9Si10-15) phase into a manlike or bone-like alpha-Fe(Al80-85Fe4-8Si6-8Cr3-5) phase which increases the elongation of the composite. The best comprehensive mechanical properties corresponded to the 7 wt% quasicrystalline particles. Strengthening mechanism of quasicrystal reinforced aluminum matrix composites, a model that model considers the dislocation strengthening mechanism and the effect of load transfers mechanism on the tensile strength of composites. This theory calculates the tensile strength of quasicrystalline reinforced aluminum matrix composites and verifies the effectiveness of the model through experiments.

High Mechanical Properties of Cast Quasicrystal-Reinforced Mg-Alloys

Structure and mechanical properties of cast quasicrystal-reinforced Mg–Zn–Al–Y base alloys

Microstructure and Mechanical Properties of Mg-Zn-Gd-Based Alloys Strengthened with Quasicrystal and Laves Phase

Quasicrystal-reinforced Mg alloys

Excellent creep properties of Mg-Zn-Cu-Gd-based alloy strengthened by quasicrystals and Laves phases

Microstructure and Mechanical Properties of As-Cast and Solution-Treated Mg-Zn-Gd-based Alloys Reinforced with Quasicrystals

Microstructure and Mechanical Properties of Squeeze Casting Quasicrystal Reinforced AZ91D Magnesium Matrix Composites

Hot Compression Deformation Behavior of Mg-Zn-Al-(Y) Alloys Reinforced with Quasicrystal

Effect of Zn and Y on microstructures and properties of normally-solidified Mg-Zn-Y alloys

Deformation Behavior of Mg–Zn–Gd-based Alloys Reinforced with Quasicrystal and Laves Phases at Elevated Temperatures

Room temperature tensile creep behavior of Mg-6Zn-0.4Mn-0.3Al-0.2Ca (wt.%) alloy containing icosahedral quasicrystals

Characterization of Aluminium Matrix Compositesreinforced by Al–Cu–Fe-Cr Quasicrystalline Particles

The effect of nanoquasicrystals on mechanical properties of as-extruded Mg-Zn-Gd alloy

Effect of Hot Extrusion on Microstructure and Mechanical Properties of Quasicrystal-Reinforced Mg-Zn-Y Alloy

Effect of quasicrystal and Laves phases on strength and ductility of as-extruded and heat treated Mg–Zn–Gd-based alloys

Growth and morphology evolution of icosahedral quasicrystal phase in Mg 30Zn 60Y 10 alloy

Microstructure and Phase Transformation of Forged Mg–3.7Zn–0.3Y–0.3Gd Quasicrystal Alloy

The Role of Nanoquasicrystals on the Ductility Enhancement of As-Extruded Mg–Zn–Gd Alloy at Elevated Temperature

Secondary Phases in Quasicrystal-Reinforced Mg–3.5Zn–0.6Gd Mg Alloy

Microstructure and Tensile Properties of As-Extruded Mg–Li–Zn–Gd Alloys Reinforced with Icosahedral Quasicrystal Phase

The Microstructure and Mechanical Properties of As-cast Mg-10Gd-3Y-xZn-0.6Zr (x=0, 0.5, 1 and 2 Wt%) Alloys