Abstract:Different solution treatments were carried out on the semi-continuously cast Mg-9.55Gd-2.27Y-1.28Zn-0.55Zr-0.11Nd (wt.%) alloy at temperatures of 480 °C, 500 °C, and 520 °C. It was found that the different solution treatment temperatures led to different phase constitutions of the alloy. The Mg3RE-type eutectic phases transform into long period stacking order (LPSO) phases with various morphologies after solution treatment. Increasing the solution temperature resulted in larger grain size, greater number of lamellar LPSO phases, and segregation of Zr element. Block LPSO phases also shifted to rod LPSO phase. After ageing treatment, the special spatial structure consisting of prismatic β′ precipitates, basal γ′ precipitates, and lamellar LPSO phases hindered dislocation movement effectively, leading to high strength. However, the accumulation of massive dislocations promoted the premature formation of cracks at the grain boundary and LPSO/Mg matrix interface, resulting in a rapid decrease in ductility of the alloy. After solution treatment at 480 °C for 12 h and aged at 200 °C for 48 h, the Mg-9.55Gd-2.27Y-1.28Zn-0.55Zr-0.11Nd alloy exhibited favorable comprehensive mechanical properties at room temperature: ultimate tensile strength (UTS) of 383 MPa, tensile yield strength (TYS) of 269 MPa, and fracture elongation (EL) of 5.1%.

Microstructure and Mechanical Properties of Mg-Zn-Gd-Based Alloys Strengthened with Quasicrystal and Laves Phase

Deformation Behavior of Mg–Zn–Gd-based Alloys Reinforced with Quasicrystal and Laves Phases at Elevated Temperatures

Excellent creep properties of Mg-Zn-Cu-Gd-based alloy strengthened by quasicrystals and Laves phases

Effect of quasicrystal and Laves phases on strength and ductility of as-extruded and heat treated Mg–Zn–Gd-based alloys

High Mechanical Properties of Cast Quasicrystal-Reinforced Mg-Alloys

Microstructure and Mechanical Properties of As-Cast and Solution-Treated Mg-Zn-Gd-based Alloys Reinforced with Quasicrystals

The Microstructure and Mechanical Properties of As-cast Mg-10Gd-3Y-xZn-0.6Zr (x=0, 0.5, 1 and 2 Wt%) Alloys

Investigations on Microstructure and Mechanical Properties of Cast Mg-Gd-Y-Zn-Zr-Nd Alloy

The Role of Nanoquasicrystals on the Ductility Enhancement of As-Extruded Mg–Zn–Gd Alloy at Elevated Temperature

Structure and mechanical properties of cast quasicrystal-reinforced Mg–Zn–Al–Y base alloys

Microstructure Evolution and Mechanical Properties of Quasicrystal-Reinforced Mg–Zn–Gd Alloy Processed by Cyclic Extrusion and Compression

Microstructure and Phase Transformation of Forged Mg–3.7Zn–0.3Y–0.3Gd Quasicrystal Alloy

Effect of Pretreatment and Annealing on Microstructure and Mechanical Properties of Mg–1.5Zn–0.25Gd (at%) Alloys Reinforced with Quasicrystal

Improvement of microstructure and mechanical properties of Mg–8Gd–3Y by adding Mg3Zn6Y icosahedral phase alloy

Microstructure and Tensile Properties of As-Extruded Mg–Li–Zn–Gd Alloys Reinforced with Icosahedral Quasicrystal Phase

The effect of nanoquasicrystals on mechanical properties of as-extruded Mg-Zn-Gd alloy

Effect of Ca Concentration on Microstructure and Mechanical Properties of As-Cast and As-Extruded Quasicrystal-Strengthened Mg-7.2Zn-2.4Gd Alloy

Room temperature tensile creep behavior of Mg-6Zn-0.4Mn-0.3Al-0.2Ca (wt.%) alloy containing icosahedral quasicrystals

Microstructure and mechanical properties of Mg-12Gd-5Y-1Sm-0.5Zr alloy

Microstructure evolution and mechanical properties of an ultra-high strength casting Mg–15.6Gd–1.8Ag–0.4Zr alloy

Microstructure and Mechanical Properties of Mg-12Gd-2Y-Sm-0.5Zr Alloy