Abstract:In this paper, an accurate calibration and calculation method of six-port circuit is proposed and tested in a microfluidic sensing system. Based on the Levenberg-Marquardt algorithm, a nonlinear iteration calibration model with the removal of redundancy equations is employed to calculate the system parameters of the six-port circuit. The reflection coefficient of device under test is calculated by the same iteration algorithm. To confirm the general accuracy of the algorithm, a series of coaxial loads are measured by six-port reflectometer. The maximum error referring to a commercial VNA is 1.2 dB/7 degrees at the lowest measured reflection coefficient magnitude of - 20 dB from 2.4 to 2.9 GHz. The mentioned calculation result of the reflection coefficient for the resonator is accurate enough to show little influence to the judgement of resonant frequency and quality factor. Utilizing the respective linear fitting curve, the real part and imaginary part of permittivity of an unknown microfluidic sample can be obtained by six-port reflectometer. The calculating range of permittivity and the average calculating error is (7.7,77.0) and 4.9 % in real part and (7.3,18.2) and 3.5 % in imaginary part. In general, this approach enhance the accuracy of reflection coefficient calculating by six-port and further improve the application value of six-port in low-cost microfluidic sensing systems.

Measurement and calibration of a universal six-port network analyzer

Multiport Network S-parameter Restoration and Calibration with 2-Port Network Analyzer

A Novel Four-Port Symmetric Probe Calibration Method for On-Wafer S-Parameter Measurement

The Structure and Self-Calibration of Eight-Port Microwave Network

Cost-Effective Single-Port Measurement Campaign for Test System Calibration

Analyzing the experiment strategy of testing the equivalent parameters of a one-port network based on triangular voltage measurement method

A New Method Based on the Construction of Hypothetical Symmetrical Networks for Fixture Calibration in Network Analyzers

A Novel Four-Port Calibration Method for High Frequency On-Wafer S-parameter Measurement

MMIC on-Wafer Test Method Based on Hybrid Balanced and Unbalanced RF Pad Structures

A hybrid probe-tip calibration for multiport vector network analyzers

An Accurate Calibration and Calculation Method of Six-Port Circuit for Microfluidic Sensing Application

S-parameter calibration procedure for multiport microwave imaging systems

Preliminary study of traceability and calibration methods of networked measurement instrument

Calibration Coefficient Model of coaxial calibration kit for network analyzer

A Unified Approach for Reformulations of LRM/LRMM/LRRM Calibration Algorithms Based on the T-Matrix Representation

Calibrations and Measurements of Microwave Propagation in a Vacuum Metal Chamber

A calibration method for vector network analyzers using a line and three or more offset-reflect standards

Symmetric-Reciprocal-Match Method for Vector Network Analyzer Calibration

Measurement Error Detection for Calibration Standards Based on Cluster Analysis

One-Port Direct/Reverse Method for Characterizing VNA Calibration Standards