Abstract:In recent years, there has been great interest in millimeter-wave (mmwave) and terahertz (THz) technologies due to an increasing demand for ultrahigh data transfer rate. Two novel solutions, i.e., antenna on chip (AoC) and antenna in package (AiP), have been proposed for the development of highly integrated radio and radar systems [1]-[5]. To measure the antenna characteristics of AoC and AiP, a reliable probe-based mm-wave/THz antenna measurement setup became essential. Over the last 20 years, the world has witnessed the prosperous development of various mmwave/THz antenna measurement setups, most of which can be divided into two types, i.e., probe-station and quasi-in-air based. The former type has a feature that allows the testing equipment to be compactly established on a large metal stage, which has been widely used for near-field based and as part of the farfield-based setups [6]-[10]. The antenna under test (AUT) is maintained on a wafer chuck placed on the stage and thus, only the radiation pattern in the upper half-space is measurable due to the metal stage obstruction. The latter type reduces the defect by using an extended supporting structure to hold the AUT in midair away from the stage so that the radiation patterns in both the upper and lower half-spaces are measurable. Many setups of this type measure antennas at far-field distances, and some of them are also compatible with near-field testing. Compared to probe-station based, quasi-inair based takes up much more space and is less compact.

S-parameter calibration procedure for multiport microwave imaging systems

A Novel Four-Port Symmetric Probe Calibration Method for On-Wafer S-Parameter Measurement

MMIC on-Wafer Test Method Based on Hybrid Balanced and Unbalanced RF Pad Structures

An Ultrawideband Asymmetric Calibration Method for a Simultaneously Electromagnetic Near-Field Probing System

A hybrid probe-tip calibration for multiport vector network analyzers

A Novel Four-Port Calibration Method for High Frequency On-Wafer S-parameter Measurement

A New Calibration Technique of Electromagnetic Simulators for Accurate Analyses of Microwave Components on Epitaxial Wafers

A Miniature Multi-Component Probe for Near-Field Scanning

An Efficient Probe Calibration Based Near-Field to Near-Field Transformation for EMI Diagnosis

Multiprobe-Enabled Over-the-Air Calibration of Millimeter-Wave Antenna Arrays: Concepts and experimental validations

Phased Array Calibration Based on Measured Complex Signals in a Compact Multiprobe Setup

Parallel Calibration Method for Phased Array with Harmonic Characteristic Analysis

A Novel Near-field Calibration Method for Linear Array Based on Plane Wave Expansion

Symmetric-Reciprocal-Match Method for Vector Network Analyzer Calibration

Calibration Loop Antenna for Multiple Probe Antenna Measurement System

Compact Radar Cross-Section Measurement Setup and Performance Evaluation

Calibration of Dual-Polarised Antennas for Air-Coupled Ground Penetrating Radar Applications

Calibrations and Measurements of Microwave Propagation in a Vacuum Metal Chamber

Cost-Effective Single-Port Measurement Campaign for Test System Calibration

An Overview of Probe-Based Millimeter-Wave/Terahertz Far-Field Antenna Measurement Setups [measurements Corner]

One-Port Direct/Reverse Method for Characterizing VNA Calibration Standards