Abstract:To reduce the negative effects of the long-time and B2O3 phase on the traditional sintering process for B4C-based composite ceramics, nearly fully dense B4C–VB2 composite ceramics were prepared by reactive spark plasma sintering (SPS) technology at 2000 °C with B and V8C7 powders as raw materials in this paper. The effects of the degassing time during SPS on the microstructure and the mechanical properties of the final products were investigated in detail. The results revealed that the proper degassing time was beneficial for the vent of B2O3 during the sintering process, which refined the grain size, promoted densification and improved the mechanical properties of the composite ceramic. However, the redundant degassing time increased the holding time at high temperature, resulting in abnormal grain growth and mechanical performance deterioration. In the present work, the optimal degassing time was 6 min, and the final product prepared under the above conditions exhibited excellent comprehensive performance with a relative density of 99.2%, Vickers hardness of 31.2 GPa, bending strength of 654 MPa and fracture toughness of 5.7 MPa m1/2. In addition, the strengthening and toughening mechanisms of the products were mainly attributed to the residual thermal stresses and bridging structure caused by the fine B4C and VB2 grains distributed uniformly.

SPS Sintering Behavior and Microstructure of ZrB2-SiCpl Composite Ceramics

Effects of SiC Platelet and ZrSi2 Additive on Sintering and Mechanical Properties of ZrB2-based Ceramics by Hot-Pressing

Processing and Mechanical Properties of Zirconium Diboride‐Based Ceramics Prepared by Spark Plasma Sintering

Spark plasma sintering and hot pressing of ZrB2–SiCW ultra-high temperature ceramics

Microstructures and mechanical properties of reactive spark plasma-sintered ZrB2–SiC–MoSi2 composites

Pressureless Sintering of Silicon Carbide Ceramics Containing Zirconium Diboride

SPS densification and ablative performance of ZrB2–SiC–ZrC composites derived from the ternary powders by sol-gel

Microstructure and mechanical properties of spark plasma sintered SiC ceramics aided by B4C

Preparation And Mechanical Properties Of Zirconium Diboride Matrix Composites Reinforced By Silicon Carbon Platelets

Densification mechanism, microstructure and mechanical properties of ZrC ceramics prepared by high-pressure spark plasma sintering

Effect of temperature on the structure and mechanical properties of SiC–TiB2 composite ceramics by solid-phase spark plasma sintering

Microstructure and mechanical properties of SiC composite ceramics modified by (TixZr1–x)B2 solid solution

The Effects of Spark-Plasma Sintering (SPS) on the Microstructure and Mechanical Properties of BaTiO₃/3Y-TZP Composites

The Effects of Spark-Plasma Sintering (SPS) on the Microstructure and Mechanical Properties of BaTiO3/3Y-TZP Composites

Effect of sintering temperature and holding time on the microstructure and mechanical properties of ZrB2–SiCw composites

Comparison of ZrB2–SiC Ceramics with Yb2O3 Additive Prepared by Hot Pressing and Spark Plasma Sintering

Preparation and Mechanical Properties of ZrB2-based Ceramics Using MoSi2 As Sintering Aids

Preparation and Mechanical Properties of Laminated Zirconium Diboride/molybdenum Composites Sintered by Spark Plasma Sintering

Preparation and interfacial bonding of oversize ZrO2 reinforced metal matrix composites prepared by spark plasma sintering

Influence of Silicon Addition on the Sintering Behavior and Mechanical Properties of Boron Carbide by SPS Process

Densification and strengthening mechanism in spark plasma sintering of B4C–VB2 ceramics via carbide boronizing