Abstract:Zirconium diboride based ultra-high temperature ceramics toughened by zirconia fiber (ZrB2–ZrO2f) were prepared by hot pressing and pressureless sintering, and the effect of two sintering techniques on the phase composition, microstructures and mechanical properties of ZrB2–ZrO2f ceramics were studied in detail. The densification behavior was investigated through the analysis of the density curves. The microstructures and mechanical properties of ZrB2–ZrO2f ceramics were analyzed and compared in order to research the influence of the two sintering techniques. Results indicated that the hot-pressing process was more suitable for preparing ZrB2–ZrO2f ceramics than pressureless sintering process. The comprehensive properties of ZrB2 plus 30vol.% ZrO2f ceramics obtained at temperature 1950°C by hot pressing for 2h were optimal, the flexural strength and fracture toughness reached 633MPa and 5.6MPa·m1/2, respectively. The higher flexural strength was attributed to the smaller size of grains and higher relative density, furthermore, the toughening mechanisms were fiber debonding, fiber pull-out, crack deflection and transformation toughening.

Comparison of ZrB2–SiC Ceramics with Yb2O3 Additive Prepared by Hot Pressing and Spark Plasma Sintering

Spark plasma sintering and hot pressing of ZrB2–SiCW ultra-high temperature ceramics

Effects of SiC Platelet and ZrSi2 Additive on Sintering and Mechanical Properties of ZrB2-based Ceramics by Hot-Pressing

Study Of The Comparative Effect Of Sintering Methods And Sintering Additives On The Microstructure And Performance Of Si3n4 Ceramic

Comparison of ZrB 2-ZrO 2f ceramics prepared by hot pressing and pressureless sintering

Preparation and Properties of ZrB2-SiC Porous Ceramics by Spark Plasma Sintering

SPS Sintering Behavior and Microstructure of ZrB2-SiCpl Composite Ceramics

Effect of pressure loading cycle on spark plasma sintered ZrB 2-SiC-Yb 2O 3 ceramics

Pressureless Sintering of Silicon Carbide Ceramics Containing Zirconium Diboride

Densification, microstructure and mechanical properties of ZrB2–SiCw ceramic composites

Preparation and Mechanical Properties of ZrB2-based Ceramics Using MoSi2 As Sintering Aids

Effect of Carbon Impurities on Hot-Pressed Zrb2-Sic Ceramics

Microstructure and Mechanical Properties of Zrb2-Based Ceramics

Processing and Mechanical Properties of Zirconium Diboride‐Based Ceramics Prepared by Spark Plasma Sintering

Influence of Hot Pressing Temperature and SiC Content on the Microstructure and Mechanical Properties of ZrB2-SiC

Mechanical Properties of NanoSiC Reinforced ZrB2-Based Ceramic Composite

Microstructure and Mechanical Properties of ZrB2-SiC Composites

Study on Zrc-20vol.%Sicw Ultrahigh Temperature Ceramics by Hot Pressing

Spark plasma sintering of B4C–ZrB2 and B4C–ZrB2–SiC ceramics

Microstructure and mechanical properties of hot pressed ZrC-SiC-ZrB 2 composites

Preparation of Zirconia Ceramics by Spark Plasma Sintering Technique and Their Mechanical Properties