Abstract:Continuous greenhouse gas monitoring at sub-zero temperatures is needed for monitoring greenhouse gas emission in cold environments such as the Arctic tundra. This work reports a single-frequency electrochemical impedance sensing (SF-EIS) method for real-time continuous monitoring of carbon dioxide (CO2) at a wide range of temperatures (-15 to 40 °C) by using robust ionic liquid (IL) sensing materials and noninvasive, low-power, and low-cost impedance readout mechanisms since they cause minimal changes in the sensing interface, avoiding the baseline change for long-term continuous sensing. In addition, a miniaturized planar electrochemical sensor was fabricated that incorporates a hydrophobic 1-butyl-1-methylpyrrolidinium bis(trifluromethylsulfonyl)imide ([Bmpy][NTf2]) IL electrolyte and Pt black electrode materials. The high viscosity of the ILs facilitates the formation of thin, ordered, and concentrated layers of ionic charges, and the inverse relationship of IL viscosity with temperature makes them especially suited for impedance sensing at low temperatures. The unique low-temperature properties of ILs together with EIS transduction mechanisms are shown to be sensitive and selective for continuously monitoring CO2 at a -15 to 40 °C temperature range via impedance changes at a specifically selected frequency at the open circuit potential (OCP). Molecular dynamics simulations revealed insights into the structure and dynamics of the IL at varying temperatures in the presence of methane and CO2 and provided potential explanations for the observed sensing results. The miniaturized and flexible planar electrochemical sensor with the [Bmpy][NTf2] electrolyte was tested repeatedly at subzero temperatures over a 58-day period, during which good stability and repeatability were obtained. The CO2 impedance sensor was further tested for sensing CO2 from soil samples and shows promising results for their use in real-time monitoring of greenhouse gas emissions in cold temperatures such as permafrost soils.

Electrochemical Sensor for Dissolved Carbon Dioxide Measurement

Carbonate‐Melt Oxidized Iridium Wire for Ph Sensing

Au thin-film electrodes based potentiometric CO2 sensor using Li3PO4 as both the reference material and the solid electrolyte

A pH Electrode Based on Melt-Oxidized Iridium Oxide

Detection of Cro42- Using A Hydrogel Swelling Microcantilever Sensor

Chemiresistive Sensor for Enhanced CO 2 Gas Monitoring

A New Electroplated Ir/Ir（OH） X Ph Electrode and Its Application in the Coastal Areas of Newport Harbor, California

New All-Solid-state Carbonate Ion-Selective Electrode with Ag 2 CO 3 -Baco 3 As Sensitive Films

CO2 Microelectrode Based on Zn-AI-LDH-ion Carrier and Its Characterization

A Flexible and Polymer‐Based Chemiresistive CO2 Gas Sensor at Room Temperature

Copper Catalysis-Based Amperometric Microsensors for Carbon Dioxide Monitoring

Solid-Electrolyte Amperometric Sensor for Simultaneous Measurement of CO and CO2 in Nitrogen

Polyethyleneimine–Chromium Oxide Nanocomposite Sensor with Patterned Copper Clad as a Substrate for CO2 Detection

Mediator-Free Self-Powered Bioassay for Wide-Range Detection of Dissolved Carbon Dioxide

Resolution for in Situ Ph Sensing on Seafloor: Ir/IrO2 Electrode with Nafion Shielding Membrane

A CO2-responsive Hydrogel Film for Optical Sensing of Dissolved CO2

CVD-fabricated Co3O4-Co3S4 heterojunction for ultra-sensitive detection of CO in SF6 discharge decomposition products

Sol-Gel Derived Carbon Ceramic Electrode Bulk-Modified With Tris(1,10-Phenanthroline-5,6-Dione)Iron(Ii) Hexafluorophosphate And Its Use As An Amperometric Iodate Sensor

Single-Frequency Impedance Studies on an Ionic Liquid-Based Miniaturized Electrochemical Sensor Toward Continuous Low-Temperature CO2 Monitoring

Fabrication of an All-Solid-State Carbonate Ion-Selective Electrode with Carbon Film as Transducer and Its Preliminary Application in Deep-Sea Hydrothermal Field Exploration

Dual Silicon Microring Resonators for Carbon Dioxide Gas Sensing