Abstract:Considerable research efforts have been devoted to finding and developing the oil locked within low -permeability reservoirs. The oil-rock interaction exacerbated in tiny pores and heterogeneities in formation epitomize the challenges accompanying the development of low-permeability reservoirs. CO2 flooding has become a promising treatment to increase displacement efficiency and formation energy for enhanced oil re-covery. Nevertheless, due to the mismatch in the viscosity of CO2 with that of the crude oil and the intrinsic heterogeneity of the reservoir, gas channeling is inevitable, resulting in low oil recovery and low CO2 storage efficiency. This paper is motivated to fabricate CO2 intelligent responsive hydrogel that exhibits a delayed swelling: the hydrogel will uptake water and swell when encountering CO2 or H+, to strengthen the plugging capacity for the gas channeling. A two-step method was used to prepare CO2 responsive (CR) hydrogel which has good injection performance and can form gel in-situ to control the gas channeling in low-permeability reservoirs. To achieve the above functions, CR polymer with acrylamide (AM) and N-[3-(Dimethylamino) propyl] meth-acrylamide (DMAPMA) was synthesized by aqueous free-radical copolymerization. CR hydrogel was prepared by crosslinking CR polymer with polyethyleneimine (PEI). Then 1.2 wt% CR polymer and 0.2 -0.4 wt% PEI were determined as the optimal synthetic formulation of CR hydrogel which is capable of maintaining stability at 80 degrees C for more than 30 days without dehydration. The gelation time was more than 24 h indicating that the CR hydrogel has good injection and in-depth migration ability. Also, the swelling behaviors of CR hydrogel were studied, and the hydrogel can expand more than 10 times in acidic conditions (pH -4.5) with respect to about 2 times in neutral conditions (pH -7). The expansion mechanism is further revealed and proved to be feasible for CO2 channeling control.

A CO2-responsive Hydrogel Film for Optical Sensing of Dissolved CO2

Electrochemical Sensor for Dissolved Carbon Dioxide Measurement

CO2-responsive Poly(n,n-Dimethylaminoethyl Methacrylate) Hydrogels with Fast Responsive Rate

Highly Sensitive Diffraction Grating of Hydrogels As Sensors for Carbon Dioxide Detection

CO 2 -Responsive Polymeric Fluorescent Sensor with Ultrafast Response

Bioinspired Adaptive Lipid-Integrated Bilayer Coating for Enhancing Dynamic Water Retention in Hydrogel-Based Flexible Sensors

QCM Sensors Based on PEI Films for CO 2 Detection

Synergy of CO2-response and aggregation induced emission in a small molecule: renewable liquid and solid CO2 chemosensors with high sensitivity and visibility.

CO$_{2}$ Gas Sensing Using Optical Fiber Fabry–Perot Interferometer Based on Polyethyleneimine/Poly(Vinyl Alcohol) Coating

Synergy of CO<sub>2</sub>-response and aggregation induced emission in a small molecule: renewable liquid and solid CO<sub>2</sub> chemosensors with high sensitivity and visibility

Gas Sensors for CO 2 Detection Based on RGO–PEI Films at Room Temperature

Visual and Gravimetric CO2 Sensing at High Humidity Levels Enabled by MOF‐804 Cofunctionalized with Ionic Liquid and m‐Cresol Purple

CO2 Responsive Expansion Hydrogels with Programmable Swelling for In-Depth CO2 Conformance Control in Porous Media

Flexible sensor patch for continuous carbon dioxide monitoring

An Intelligent CO2-responsive Hydrogel for Applications in Enhanced Oil Recovery and CO2 Geological Storage

Lab-on-Fiber Fabry–Perot Interferometer Integrated With Functionalized Polymer for Carbon Dioxide Sensing

A Dual Ph/o2 Sensing Film Based on Functionalized Electrospun Nanofibers for Real-Time Monitoring of Cellular Metabolism.

Manipulating polymer composition to create low-cost, high-fidelity sensors for indoor CO2 monitoring

A facile CO2 switchable nanocomposite with reversible transition from sol to self-healable hydrogel

Comparative CO2-Sensing Characteristic Studies of PEI and PEI/Starch Thin Film Sensors

Insect-Inspired Strategy for Conferring Reversible, High Responsivity on Microgels to Dilute-Source CO2