Abstract:In recent years, the new type design of current transformer with bushing structure has been widely used in the distribution network system due to its advantages of miniaturization, high mechanical strength, maintenance-free, safety and environmental protection. The internal temperature field distribution is an important characteristic parameter to characterize the thermal insulation and aging performance of the transformer, and the internal temperature field distribution is mainly derived from the joule heat generated by the primary side guide rod after flowing through the current. Since the electric environment is a transient field and the thermal environment changes slowly with time as a steady field under the actual conditions, it is more complex and necessary to study the electrothermal coupling field of current transformer (CT). In this paper, a 3D simulation model of a new type design of current transformer for distribution network based on electric-thermal coupling is established by using finite element method (FEM) software. Considering that the actual thermal conduction process of CT is mainly by conduction, convection and radiation, three different kinds of boundary conditions such as solid heat transfer boundary condition, heat convection boundary condition and surface radiation boundary condition are applied to the CT. Through the model created above, the temperature rise process and the distribution characteristics of temperature gradient of the inner conductor under different current, different ambient temperatures and different core diameters conditions are studied. Meanwhile, the hottest temperature and the maximum temperature gradient difference are calculated. According to this, the position of weak insulation of the transformer is determined. The research results can provide a reference for the factory production of new type design of current transformer.

Research on Magnetic Field of Current Transformer under Non Uniformly-Distributed Equal Ampere-turns Test

Testing of High Current Transformer by Non-Uniform Equivalent Magnetomotive Force Method

3D FEM Computation of Magnetic Field of Heavy Current Transformer with Shielding Coils

Design Method of Non-uniformly Distributed Winding for Anti-interference Equivalent Test of Heavy Current Transformers

3-D Nonlinear Transient Eddy Current Calculation of Online Power Transformer under DC Bias

The Analysis and Equivalent Method of Five-Phase Current Stray Magnetic Field in Heavy Current Transformer

Study on the Currents of Two-stage Current Transformer under the Small Secondary Current Method

Study of Current Measurement Method Based on Circular Magnetic Field Sensing Array

Three-Dimensional Electro-Thermal Analysis of a New Type Current Transformer Design for Power Distribution Networks

Introduction of an intriguing approach for eletric current transformer on-site examining repairing

Design of double-loop current transformer based on magnetic field incomplete cancellation

New Testing Method of the Shielding Effect of Heavy Current Transformer with Shielding Coils

A Novel Current Transformer Based on Virtual Air Gap and Its Basic Measuring Characteristics

A Novel Algorithm for Transient Current Reconstruction Using Mangnetic Sensor Arrays

Research on Influence of External Current to Error of Current Transformer

Modeling and Simulation Analysis of Current Transformer Based on Magnetizing Current As the Solution Variable

Eccentric bus-bar testing method of the shielding effect of heavy current transformer with shielding coils

Distributed Magnetic Flux Density on the Cross-Section of a Transformer Core

Design Of Equivalent Coils For Anti-Interference Testing Of Heavy Current Transformers

Measurement of Three-Dimensional Magnetic Properties with Feedback Control and Harmonic Compensation.

Short‐circuit Current Difference of Parallel Strands in Winding Turns and Its Influence on the Distribution of Electromagnetic Force