Abstract:Purpose This paper aims to develop a model that reflects the current transformer (CT) core materials nonlinearity. The model enables simulation and analysis of the CT excitation current that includes the inductive magnetizing current and the resistive excitation current. Design/methodology/approach A nonlinear CT model is established with the magnetizing current as the solution variable. This model presents the form of a nonlinear differential equation and can be solved discretely using the Runge–Kutta method. Findings By simulating variations in the excitation current for different primary currents, loads and core materials, the results demonstrate that enhancing the permeability of the B–H curve leads to a more significant improvement in the CT ratio error at low primary currents. Originality/value The proposed model has three obvious advantages over the previous models with the secondary current as the solution variable: (1) The differential equation is simpler and easier to solve. Previous models contain the time differential terms of the secondary current and excitation flux or the integral term of the flux, making the iterative solution complicated. The proposed model only contains the time differential of the magnetizing current. (2) The accuracy of the excitation current obtained by the proposed model is higher. Previous models calculate the excitation current by subtracting the secondary current from the converted primary current. Because these two currents are much greater than the excitation current, the error of calculating the small excitation current by subtracting two large numbers is greatly enlarged. (3) The proposed model can calculate the distorted waveform of the excitation current and error for any form of time-domain primary current, while previous models can only obtain the effective value.

The Analysis and Equivalent Method of Five-Phase Current Stray Magnetic Field in Heavy Current Transformer

Evaluation of the Calculation Method for Stray Losses in Structural Parts of HVDC Converter Transformers

Simulation and Analysis of Electromagnetic Properties at the Secondary Port of Electronic Current Transformers Under Very Fast Transient Overvoltage

The Numerical Simulation Method of Transformer Internal Short-Circuit Fault

Calculation Method of Winding Eddy-Current Losses for High-Voltage Direct Current Converter Transformers

3D FEM Computation of Magnetic Field of Heavy Current Transformer with Shielding Coils

Performance Comparison of Different Types of Internal Magnetic Shielding on Heavy Current Transformer

Research on Magnetic Field of Current Transformer under Non Uniformly-Distributed Equal Ampere-turns Test

Design Of Equivalent Coils For Anti-Interference Testing Of Heavy Current Transformers

Modelling and Optimization of Four-Segment Shielding Coils of Current Transformers

Design Method of Non-uniformly Distributed Winding for Anti-interference Equivalent Test of Heavy Current Transformers

Modeling and Simulation Analysis of Current Transformer Based on Magnetizing Current As the Solution Variable

Dynamic Electromagnetic Force Analysis of a Power Transformer with Regulated Windings

ANALYSIS OF ELECTROMAGNETIC FIELDS AND EDDY CURRENT LOSSES IN LARGE POWER TRANSFORMERS

New Testing Method of the Shielding Effect of Heavy Current Transformer with Shielding Coils

Testing of High Current Transformer by Non-Uniform Equivalent Magnetomotive Force Method

Interference Mechanism of External Current on Heavy Current Transformer

Calculation Of Eddy Current Field In The Ascending Flange For The Bushings And Tank Wall Of A Large Power Transformer

Analytic Calculation and Analysis of the Magnetic Field for the Single-Phase Two-Limb Transformer

On-line Demagnetization Method for an Iron Core CT

An Improved Vector Hysteresis Model Incorporating the Effect of DC-Biased Field and its Application to FEM Analysis of Three-Limb Transformer Core