Abstract:This paper applications inclined exposure, millimeter grade thickness polymer processing technology, and optimized process parameters to produce a 45 degrees mirror structure that can be used in micro optical pickup heads meeting optical surface roughness requirements. The mirror structure was made from polymer material. Quantitative ultra-low-speed coating and surface tension were employed to fabricate microstructures with a height of approximately 1.5 turn, white overcoming the restriction that ordinary silicon wafers can only have a thickness of several hundred mu m. AFM and interferometer measurements indicated that surface roughness was approximately 10 nm, which complies with optical grade lambda/40 (lambda = 405nm) requirements. The method can therefore be used to blue light optical pickup heads for micro-optical storage systems. To resolve the problem of diffraction when the surface of the thick photoresist is not flat during exposure and also ease the problem of matching the indices of refraction of materials with different UV tight transmission. This paper filled the space between the mask and photoresist with materials with matching indices of refraction in order to create a medium with matching index of refraction, which can increase the structure's applicability during the integration process. This technique offers high thickness and angle selectivity, and can be advantageously used in array and batch manufacturing. It can further be used to produce a pair of completely parallel 45 degrees mirror structures while avoiding the huge cost and alignment error of manual assembly.

The implementation of concave micro optical devices using a polymer dispensing technique

Novel Concave-Based Micro Optical Components

Toward On-Chip Unidirectional and Single-Mode Polymer Microlaser

In Situ Fabrication of a Tunable Microlens.

A Bio-Inspired Optical System with a Polymer Membrane and Integrated Structure

Unidirectional Lasing from A Spiral-Shaped Microcavity of Dye-Doped Polymers

A New Route for Fabricating Polymer Optical Microcavities.

Microlens formation technology utilizing multi-phase liquid ambiance

Implementation of a micro ball lens on a silicon optical bench using insoluble two-phase liquid immersion technology

A novel micro optical system employing inclined polymer mirrors and Fresnel lens for monolithic integration of optical disk pickup heads

Formation and curvature tuning of micro lens using surface tension and hydraulic pressure assisted molding process

Rapid fabrication of large-area concave microlens arrays on PDMS by a femtosecond laser

Biconvex Polymer Microlenses with Tunable Imaging Properties Designed by Janus Droplet Microfluidics

Concave Microlens Array Mold Fabrication in Photoresist Using UV Proximity Printing

Formation and Integration of a Ball Lens Utilizing Two Phase Liquid Technology

Optimal Fabricate Technology of Polymer Micro Optical Mirror

Biomimetic optical system using polymer lenses with tunable focus

Optical Nanofabrication of Concave Microlens Arrays

From Spheric To Aspheric Solid Polymer Lenses: A Review

High Curvature Concave–Convex Microlens

High refractive index chalcogenide polymer-based planar refractive microlens components