Abstract:The optical observation of sub-micron structures encounters significant challenges due to the inadequate spatial shape matching of optical devices and the limitations imposed by diffraction. These factors result in suboptimal imaging resolution and the introduction of defocus distortion. One approach to mitigating these limitations involves utilizing a liquid microlens (LML) assisted microscope, which offers real-time and localized control capabilities. However, the dynamic tuning of LML is subject to volatility and instability, adversely affecting submicron resolution imaging. To address this issue, a contour-following coating inspired by the natural cornea is applied to the droplet's surface, resulting in the formation of liquid microlens compound structures (LMLCS). Firstly, photoresist microholes are fabricated on the optical disc. Then, liquid self-assembly technology is used to fill glycerol in the microholes. At last, a conformal spreading method of UV-curable adhesive precursor film is developed to ensure the combination of the microlens bilayer structure. Through the application of optical information transmission theory, finite difference time domain (FDTD) method, and the principle of Abbe microscopic imaging, the imaging magnification process and sub-micron resolution characteristic of the LMLCS are revealed. Remarkably, the obtained focal width at half maximum (FWHM) of 1.54 mu m is smaller than the theoretical value, enabling reconfigurable sub-micron resolution observation and 1.63 times imaging magnification of 226 nm grating lines under the optical microscope. Compared with unencapsulated LML, this compound structure exhibits better sub-micron resolution capability, greater imaging magnification, and faster adaptive dynamic response characteristics. Consequently, the LMLCS introduces exciting prospects for exploring optical sub-micron measurement and sensing devices with exceptional performance.

Formation and Integration of a Ball Lens Utilizing Two Phase Liquid Technology

Implementation of a micro ball lens on a silicon optical bench using insoluble two-phase liquid immersion technology

Microlens formation technology utilizing multi-phase liquid ambiance

In Situ Fabrication of a Tunable Microlens.

Flexible fluidic lens with polymer membrane and multi-flow structure

Bioinspired solid–liquid mixed tunable lens with multilayered structure

A Bio-Inspired Optical System with a Polymer Membrane and Integrated Structure

Bionic Optical Imaging System with Aspheric Solid–liquid Mixed Variable-Focus Lens

A novel lens formation technology to implement a 3D spherical polymer lens

From Spheric To Aspheric Solid Polymer Lenses: A Review

Formation and curvature tuning of micro lens using surface tension and hydraulic pressure assisted molding process

Liquid Microlens Compound Structure for Enhanced Sub-Micron Resolution Imaging and Accelerated Reconfigurable Deformation Manipulation

Liquid Microlens with Tunable Focal Length and Light Transmission

The implementation of concave micro optical devices using a polymer dispensing technique

Fabrication of Polymer Compound Microlens by Lens-on-lens Microstructures

Two-dimensional Silicon-on-glass Actuator Combined with a Dispensed Polymer Microlens

Doublet liquid variable-focus lens for spherical aberration correction

Fabrication Of Aspherical Liquid Lens Controlled By Electrostatic Force

Design and Implementation of an On-Chip Polymer Micro Ball Bearing

Optically anisotropic, electrically tunable microlens arrays formed via single-step photopolymerization-induced phase separation in polymer/liquid-crystal composite materials