Abstract:A method is proposed to achieve the singlet achromatic microlens of the wavelength‐scale thickness by utilizing high refractive index materials with an aspherical profile. Accordingly, three materials with different degrees of refractive index and dispersion are selected to prepare achromatic microlenses. The results demonstrate all achieving achromatic limiting focus. Moreover, the thickness of the high‐index microlens is only 573 nm, a reduction of ≈50% compared to the low‐index microlens. The common methods used for correcting chromatic aberration are typically based on multi‐lens and multi‐material systems, resulting in lens thicknesses that are several orders of magnitude greater than the wavelength and complex combination designs. A method to achieve the singlet achromatic microlens of the wavelength‐scale thickness by utilizing high refractive index materials with an aspherical profile is proposed. A theoretical model based on the dispersion effect is developed to guide the selection of materials and the design of thicknesses for achieving chromatic aberration correction in singlet microlenses of a given diameter and numerical aperture. H‐ZLaF68N (68N) glass, sapphire, and fused silica with relatively high to low refractive index are selected to prepare the singlet achromatic microlenses to verify the validity of the model. The thicknesses of three microlenses are 573, 737 nm, and 1.27 μm, respectively, and all of them have achieved achromatic correction as designed. This indicates that the high refractive index material not only achieves achromatic aberration but also reduces the thickness by ≈50% compared with the conventional low refractive index material of silica glass. The presented wavelength‐scale singlet achromatic microlens hold significant promise for compact wearable devices, dynamic holography, and color projection displays.

High refractive index chalcogenide polymer-based planar refractive microlens components

Toward On-Chip Unidirectional and Single-Mode Polymer Microlaser

Construct Achromatic Polymer Microlens for High‐Transmission Full‐Color Imaging

Highly Efficient Broadband Achromatic Microlens Design Based on Low-Dispersion Materials

Solution Processing and Resist‐Free Nanoimprint Fabrication of Thin Film Chalcogenide Glass Devices: Inorganic–Organic Hybrid Photonic Integration

Demonstration of High-Performance, Sub-Micron Chalcogenide Glass Photonic Devices by Thermal Nanoimprint

Microlens formation technology utilizing multi-phase liquid ambiance

Fabrication of multi-focal chalcogenide glass microlens arrays based on femtosecond laser-assisted chemical etching method

Cascaded chiral birefringent media enabled planar lens with programable chromatic aberration

Planar Chalcogenide Glass Mid-Infrared Photonics

Chalcogenide Glass Planar Photonics: from Mid-Ir Sensing to 3-D Flexible Substrate Integration

Fabrication of microlens array on chalcogenide glass by wet etching-assisted femtosecond laser direct writing

Integrated Flexible Chalcogenide Glass Photonic Devices

Fabrication of Chalcogenide Glass Based Hexagonal Gapless Microlens Arrays via Combining Femtosecond Laser Assist Chemical Etching and Precision Glass Molding Processes

The implementation of concave micro optical devices using a polymer dispensing technique

High-Performance, High-Index-Contrast Chalcogenide Glass Photonics on Silicon and Unconventional Non-planar Substrates

Wavelength Scale Singlet Achromatic Microlenses Based on High Refractive Index Materials

Progress In Femtosecond Laser Fabrication Of Microlens Array With Spatial Light Modulators

Novel Concave-Based Micro Optical Components

Liquid crystal microlens arrays with switchable positive and negative focal lengths

Optically anisotropic, electrically tunable microlens arrays formed via single-step photopolymerization-induced phase separation in polymer/liquid-crystal composite materials