Abstract:In this study, the microstructure of polycrystalline Co-doped BaFe 2 As 2 superconducting bulks was comprehensively analyzed. The synthesis process involved ball milling and subsequent spark plasma sintering (SPS). A strong correlation between the microstructure and synthesis conditions was observed. Specifically, when mechanochemical synthesis of raw metal powders was carried out at a ball milling energy ( EBM ) of 100 MJ/kg, the resulting Co-BaFe 2 As 2 bulk contained nanograins with a high density of planar defects and exhibited a high critical current density ( Jc ) under both magnetic and self-fields. The findings suggest that planar defects are one of the influential factors on the superconducting properties. Atomic-resolution microstructural characterization revealed that the planar defects are parallel to (001) and exhibit distinctive atomic arrangements. Atomic-resolution elemental mappings displayed a remarkable barium concentration in planar defects and grain boundaries compared to the BaFe 2 As 2 matrix. Local strain fields were also observed around planar defects, especially near their edges. These nanoscale strain fields could be considered as volumetric pinning centers, and effectively pin flux vortices in the random crystal orientation, thereby increasing Jc in the Fe-based superconducting bulk. Additionally, an extended investigation was performed to include a K-doped BaFe 2 As 2 bulk that exhibits similar planar defects. Based on the results of the microstructural analysis, speculations were mode on the evolution process of the microstructure during the preparation of BaFe 2 As 2 bulks.

Microstructure of the ceramic in superconducting Bi-2223 composite tapes after bending strain cycles

Influence of Torsional Strain on the Bi-2212 Tapes and Round Wires under Background Field

Bending–Peeling Method to Measure Interface Strength of YBCO Tape

Investigation of Local Texture Correlations in Bi-2223 High Temperature Superconductor Tapes

Post Annealing Of Bi-2223/Ag Superconductor Tapes

The evolution of Bi-2223 phase and liquid phase during the first heat treatment in Bi-2223/Ag superconducting tapes

Constitutive Behavior of a Superconducting Powder BSCCO Crystal

Effect of Pre-Treatment on the Microstructure and Superconducting Properties of Bi-2223/Ag Tapes

STUDY ON THE PERFORMANCES OF SEVERAL LAMINATED Bi-2223/Ag HIGH TEMPERATURE SUPERCONDUCTOR TAPE COMPOSITE STRUCTURES

The Influence of Electroplastic Rolling on the Mechanical Deformation and Phase Evolution of Bi-2223/Ag Tapes

Homogeneity Study of Bi-2223/Ag Monofilamentary Tapes Using Hall Sensor Magnetometry

Microstructure and Critical Current Density of Bi-2212 Single- and Multi-filamentary Wires with Overpressure Heat Treatment Processing

Mechanical Properties Of (Bi,Pb)-2223 Multifilament Tapes With Ag-Alloy Sheath

Thermal Effects on the Microstructure of Superconducting (Bi1.8pb0.35)sr2ca2cu3oy

Influence of Repeated Tensile Stress on Determining the Critical Tensile Stress/Strain of Copper Reinforced Bi-2223/Ag Tapes

In-situ study of the fracture behavior of SiCf/SiC composite material under three-point bending

Study of air heat treatment on Bi-2223/Ag superconducting tapes

Chemical stability and superconductivity in Ag-sheathed CaKFe4As4 superconducting tapes

Anomalous Structural-Changes and Elastic Properties of Bismuth Oxide Superconductors

Planar defects and strain distributions in polycrystalline BaFe 2 As 2 superconductors synthesized by mechanochemical methods

Deformation Distribution of Multi-Filament Superconducting Tape During Rolling Process