Abstract:To accurately predict the drying of a porous medium from saturated to unsaturated conditions over time, this paper proposes two-phase partitioning boundaries for liquid water evaporation and water vapor transport at the medium surface. A non-isothermal two-phase (liquid water and gas mixtures), two-component (dry air and water vapor) transport model with nonequilibrium and interface-dependent phase change is then developed. The governing equations are then numerical solved using COMSOL Multiphysics software and applied to describe a series of laboratory soil drying tests as examples. The performance of the proposed boundaries at the surface is illustrated by comparison with other three common used boundaries. The results show that a specific flux of vapor at the surface with a zero flux of liquid water cannot be adopted to describe the drying process of initially saturated media due to the lack of interconnected gas-filled pores. The merged liquid-vapor boundary applied in the Darcy-Richards model significantly prolongs the constant rate stage when the liquid water evaporation is dominant. Then, the effects of air/gas-water interfacial area and water retention parameters on the drying process are investigated. A faster reduction in the air-water relative interfacial area at the medium surface will shorten the drying process with earlier dominance of the vapor transport. An increased entry capillary pressure and a decreased pore size distribution index for the water retention curve will result in slower drying, more loss by vapor transport and a more homogeneous distribution of pore water respect to depth. The current study can promote the understanding of the evolution of drying mechanisms of a porous medium from saturated to unsaturated conditions.

Multi-phase Flow and Drying Characteristics in a Semi-Circular Impinging Stream Dryer

Optimal Design of an Angular Box for a Mixed Flow Grain Dryer

On the Applicability of the Coarse Grained Coupled CFD-DEM Model to Predict the Heat Transfer During the Fluidized Bed Drying of Pharmaceutical Granules

CFD-DEM investigation of the gas-solid flow characteristics in a fluidized bed dryer

Hydrodynamics of Continuous Spiral Dryer with Rotatory Conical Sleeves: Experiments Versus CFD Simulations

A Simulation Study of Heat and Mass Transfer in A Honeycombed Rotary Desiccant Dehumidifier

Modeling of Muti-layer Far-Infrared Dryer

Heat Transfer Characteristics of Condensation and Flow Regime in Horizontal Rectangle Channel of Multi-Channel Cylinder Dryer

Modeling Simultaneous Heat and Mass Transfer for Microwave Drying on Apple

An Investigation of Heat Transfer of Flexible Fibers in a Rotating Drum Dryer Using the Discrete Element Method

Flow and Heat Transfer Characteristics of Materials in the Flighted Rotary Dryer

Research on Flow and Condensation Heat Transfer Coefficient of multi-channel cylinder dryer in U-shaped Section

Theoretical and experimental research on heat and mass transfer in a turbine thin layer dryer

Prediction of the Non-Uniform Drying of Wet Grain in a Fluidised-Bed Based on a Modified CFD-DEM Drying Model

SIMULATION OF BIOMASS DRYING IN A DIRECT CONTACT ROTARY DRYER

Experimental and numerical study of the airflow distribution in mixed-flow grain dryers

Heat and Mass Transfer Simulation of Intensification Drying Technologies: Current Status and Future Trends

Numerical modeling of drying from saturated to unsaturated conditions with two-phase partitioning boundaries at the medium surface and interface-dependent phase change

Heat and Mass Transfer in Agitated, Co-, or Countercurrent Conductive–Convective Heated Drum Dryer

Heat and Mass Transfer in Unsaturated Porous Cake with Heated Walls