Abstract:Topochemical microcrystal conversion (TMC) method is a powerful tool to synthesize platelike microcrystal particles with a regular-perovskite crystal structure, which is difficult to be fabricated by conventional flux techniques. By using the TMC method, polycrystalline rectangular-platelike NaNbO3 particles with a orthorhombic perovskite structure were able to be synthesized from platelike precursor particles of layer-structured K4Nb6O17 at 1000°C in molten NaCl-salt. The TMC-synthesized NaNbO3 particles preserved the shape of precursor particles, and had a thickness of about 1 micron and a width of 5-10 microns. However TMC-synthesized platelike NaNbO3 particles had a polycrystalline morphology having a preferred pseudo-cubic {100} orientation. Oriented particulate layer X-ray diffraction (OPL-XRD) analysis revealed that, during the TMC reaction, the crystallographic {010} plane of K4Nb6O17 is converted to the most of {001} plane of polycrystalline NaNbO3 particles in spite of polycrystalline morphology. Using the polycrystalline platelike NaNbO3 particles as a template in the reactive templated grain growth method (RTGG), {001} grain-oriented (K0.5Na0.5)NbO3—1 mol% CuO ceramics having a {001} orientation degree (Logering’s factor) of 45% could be fabricated. The result indicates that not only single crystalline particles, which were generally used, but also the polycrystalline particles can be act as template in the RTGG process. The availability of polycrystalline particles will give a new design of synthesizing templates for texturing of various kinds of perovskite crystal-structured ceramics.

Topochemical Synthesis of Plate‐Like Na0.5Bi0.5TiO3 from Aurivillius Precursor

Low temperature synthesis of plate-like Na0.5Bi0.5TiO3 via molten salt method

Synthesis of Micron‐Scale Platelet BaTiO3

Synthesis of High-Aspect-Ratio BaTiO3Platelets by Topochemical Conversion and Fabrication of Textured Pb(Mg1/3Nb2/3)O3-32.5PbTiO3Ceramics

Synthesis of Ba0.6Sr0.4TiO3 Platelet Crystals Based on Bi4Ti3O12 Precursor by Topochemical Microcrystal Conversion

Topochemical Synthesis of a High‐Aspect‐Ratio Platelet NaNbO3 Template

Fabrication Of Na0.5bi0.5tio3-Batio3-Textured Ceramics Templated By Plate-Like Na0.5bi0.5tio3 Particles

Fabrication of Na<sub>0.5</sub>Bi<sub>0.5</sub>TiO<sub>3</sub>-BaTiO<sub>3</sub>-Textured Ceramics Templated by Plate-Like Na<sub>0.5</sub>Bi<sub>0.5</sub>TiO<sub>3</sub>Particles

Synthesis and Formation Mechanisms of High Aspect Ratio KNb5Bi2O16 Template Via Topochemical Method

Formation mechanism of barium titanate single crystalline microplates based on topochemical transformation using bismuth-based precursors

Fabrication and topchemical transformation mechanism of PbTiO3 microplatelets

Formation Mechanism of (001) Oriented Perovskite SrTiO3 Microplatelets Synthesized by Topochemical Microcrystal Conversion.

Fabrication of PbBi4Ti4O15 microplatelets with different TiO2 reactants

Morphological evolution of plate-like B-site complex perovskite Pb(ZrxTi1-x)O3 microcrystals

Hydrothermal Synthesis and Formation Mechanism of the Single-Crystalline Bi4Ti3O12nanosheets with Dominant (010) Facets

Synthesis of Nanocrystalline 0.94Bi<sub>0.5</sub>Na<sub>0.5</sub>TiO<sub>3</sub>-0.06BaTiO<sub>3</sub> Powder by a Citrate Method

Synthesis of Nanocrystalline 0.94Bi(0.5)na(0.5)tio(3)-0.06Batio(3) Powder by A Citrate Method

Synthesis of polycrystalline platelike NaNbO3 particles by the topochemical micro-crystal conversion from K4Nb6O17 and fabrication of grain-oriented (K0.5Na0.5)NbO3 ceramics

Synthesis of (bi0.5na0.5)tio3 Nanocrystalline Powders by Stearic Acid Gel Method

PREPARATION OF NANOSIZED Bi3.25 La0.75 Ti3 O12 POWDER BY COPRECIPITATION METHOD

Synthesis and properties of (Bi0.5Na0.5)TiO 3 powders by hydrothermal method