Abstract:Achieving high piezoelectric performance in the representative lead-free materials of Bi1/2Na1/2TiO3-BaTiO3 (BNT-BT) is of great interest. However, it remains a challenge in these materials, as they feature structural phases with strong octahedral tilting at morphotropic phase boundary (MPB). Herein, we obtain good piezoelectric performance with relatively large d 33 value (219 pC/N), small coercive field (1.5 kV/mm), and good thermal stability in the (1-x)(Na0.5Bi0.5)TiO3-x(0.9BaTiO3-0.1BiAlO3) ternary system by crystal structure design. It is found that the incorporation of BiAlO3 with large tolerance factor can suppress the octahedral tilting and reduce the structural distortion of R3c and P4bm at MPB, and thus allows the electric field induced an extensive and reversible phase transformation. By using in-situ electric field synchrotron X-ray diffraction, it is revealed that the crystal lattice of the R3c phase with a smaller structural distortion responds more flexible to the electric field than that of the P4bm phase with a larger structural distortion. The piezoelectric strain analysis through profiles fitting indicates that the enhanced piezoelectric response attributed to both the activated domain switching and enhanced lattice strain benefited from the subtle phase structure. These findings provide further insights into the dynamic structural response of BNT-based materials, and will be helpful in designing high-performance piezoelectric materials beyond the MPB.

Low temperature synthesis of plate-like Na0.5Bi0.5TiO3 via molten salt method

Topochemical Synthesis of Plate‐Like Na0.5Bi0.5TiO3 from Aurivillius Precursor

Low-temperature preparation of nanoplated bismuth titanate microspheres by a sol–gel-hydrothermal method

Low‐Temperature Synthesis of Bi3.15Nd0.85Ti3O12 Nanoplates by a Sol–Gel‐Hydrothermal Method

Synthesis and properties of (Bi0.5Na0.5)TiO 3 powders by hydrothermal method

Synthesis of Ba0.6Sr0.4TiO3 Platelet Crystals Based on Bi4Ti3O12 Precursor by Topochemical Microcrystal Conversion

Synthesis of High-Aspect-Ratio BaTiO3Platelets by Topochemical Conversion and Fabrication of Textured Pb(Mg1/3Nb2/3)O3-32.5PbTiO3Ceramics

Synthesis of Bi0.5(Na0.7K0.2Li0.1)0.5TiO3 powders through the molten salt method

Synthesis of Micron‐Scale Platelet BaTiO3

Morphological evolution of plate-like B-site complex perovskite Pb(ZrxTi1-x)O3 microcrystals

Low-Temperature High-Efficiency Preparation of TiB 2 Micro-Platelets via Boro/Carbothermal Reduction in Microwave Heated Molten Salt.

Morphology-controlled Synthesis and Growth Mechanism of Lead-Free Bismuth Sodium Titanate Nanostructures Via the Hydrothermal Route

Bismuth Sodium Titanate Lead-Free Piezoelectric Ceramics Fabricated by Using Novel Low-Temperature Solid-State Synthesis Method

Preparation and electric properties of Bi0.5 Na0.5 TiO3- Bi (Mg0.5 Ti0.5) O3 lead-free piezoceramics

Synthesis and Properties of (bi<sub>0.5</sub>na<sub>0.5</sub>)tio<sub>3</sub> Powders by Hydrothermal Method

Effect of the template particles size on structure and piezoelectric properties of 〈0 0 1〉‐textured BNT‐based ceramics

A simple, low-temperature fabrication method of highly (100)-oriented (Na0.85K0.15)0.5Bi0.5TiO3 thin films with outstanding electric properties

Study of the synthetic process of CaBi2Ta2O9 powder by the molten‐salt method

Structural origin for the high piezoelectric performance of (Na0.5Bi0.5)TiO3-BaTiO3-BiAlO3 lead-free ceramics

Sintering of large‐sized and near‐stoichiometric BNT ceramics with enhanced dielectric and electrostrictive properties

Preparation and electric properties of Bi0.5Na 0.5TiO3-Bi(Al0.5Ga0.5)O3 lead-free piezoceramics