Abstract:Composite ceramics of 0.7BaO center dot 0.3SrO center dot(I-gamma)TiO2 center dot gamma Nb2O5 (BSTN) with coexistence of barium strontium titanate, Ba1-xSrxTiO3 (BST), and strontium barium mobate, SrxBa1-xNb2O6 (SBN) phases were successfully prepared in situ by controlling excess components according to a specially designed formula of 0.7BaO center dot 0.3SrO center dot(1-gamma)TiO2 center dot gamma Nb2O5 and by using a traditional ceramic process. X-ray diffractometry (XRD), scanning electron microscopy (SEM) and energy dispersion spectrometer (EDS) were used to characterize the phase composition, morphology and the micro-area chemical composition of the composite ceramics. The results showed that the SBN tungsten bronze phase appeared and coexisted stably with the BST perovskite phase when the excess content of Nb2O5 was > 6mol%, whereas the BST perovsklite phase formed and coexisted stably with the SBN tungsten bronze phase when the excess content of TiO2 was > 5.3mol%. In the ease of the two phases being equivalent to each other in BSTN composite ceramics, Nb2O5 was hard to be resolved into the perovskite phase, however, a few of TiO2 was easy to be resolved in the tungsten bronze phase. The microstructure of the composite ceramics were consisted of two kinds of grains. The smaller polygonal grains were belonged to the BST phase, and the larger ones to the SBN phase. The coexistence of the two phases inhibited the growth of the BST crystal. The density of microstructure of the composite ceramic was higher than that of both the pure BST and SBN calcined at the same temperature for the same time.

Fabrication of Na<sub>0.5</sub>Bi<sub>0.5</sub>TiO<sub>3</sub>-BaTiO<sub>3</sub>-Textured Ceramics Templated by Plate-Like Na<sub>0.5</sub>Bi<sub>0.5</sub>TiO<sub>3</sub>Particles

Fabrication Of Na0.5bi0.5tio3-Batio3-Textured Ceramics Templated By Plate-Like Na0.5bi0.5tio3 Particles

Fabrication and Electrical Properties of Textured Na 1/2 Bi 1/2 TiO 3 -Batio 3 Ceramics by Reactive-Templated Grain Growth

Study on Textured Nbt-6bt Ceramics Fabricated by (reactive) Templated Grain Growth

Preparation and Characterization of Textured Bi0.5(Na0.8 K0.2)0.5TiO3 Ceramics by Reactive Templated Grain Growth

Texture Development in Na<sub>1/2</sub>Bi<sub>1/2</sub>TiO<sub>3</sub>-BaTiO<sub>3</sub> Ceramics by Reactive-Templated Grain Growth

Textured Pb(Mg1/3Nb2/3)O3-PbTiO3 Ceramics by Templated Grain Growth

Texture Development in Na1/2bi1/2tio3-Batio3 Ceramics by Reactive-Templated Grain Growth

Textured Pb(Mg1/3nb2/3)O-3-Pbtio3 Ceramics By Templated Grain Growth

Textured Pb(Mg1/3Nb2/3)O3-PbTiO 3 ceramics by templated grain growth

Textured Pb(Mg<sub>1/3</sub>Nb<sub>2/3</sub>)O<sub>3</sub>-PbTiO<sub>3</sub> Ceramics by Templated Grain Growth

Study On The Textured Bnkt Ceramics By Reactive Templated Grain Growth

Topochemical Synthesis of Plate‐Like Na0.5Bi0.5TiO3 from Aurivillius Precursor

Effect of the template particles size on structure and piezoelectric properties of 〈0 0 1〉‐textured BNT‐based ceramics

Synthesis of High-Aspect-Ratio BaTiO3Platelets by Topochemical Conversion and Fabrication of Textured Pb(Mg1/3Nb2/3)O3-32.5PbTiO3Ceramics

Effect of SrTiO3 Template on Electric Properties of Textured BNT–BKT Ceramics Prepared by Templated Grain Growth Process

(001) Textured Pb(Mg1/3nb2/3)O-3-Pbtio3 Ceramics Prepared by Reactive Templated Grain Growth

Fabrication Of Textured Batio3 Ceramics

Large electric field induced strain of Bi(Mg1/2Ti1/2)O3-Pb(Mg1/3Nb2/3)O3-PbTiO3 ceramics textured by Template Grain Growth

Structure and Strain Behavior of <00l> Textured BNT-based Ceramics by Template Grain Growth

In situ Preparation of BST(Nb)/SBN(Ti) Composites