Abstract:In the current work, the effect of nano-sized Sn (50 nm)/Sr partial replacement on the superconducting properties such as crystal structure, quality of intra- and intergrain boundary coupling, dc electrical resistivity, and dc magnetization in the Bi-2212 ceramic superconductors were investigated. Ceramic superconductors with nominal composition of Bi 2 Sr 2- x (Sn) x Ca 1 Cu 1.75 Na 0.25 O y where x = 0.25, 0.30, 0.35 and 0.40 were prepared by solid-state reaction method and characterized by powder X-ray diffraction (XRD), dc electrical resistivity, scanning electron microscopy (SEM) and magnetic hysteresis (M–H) measurements. Phase examination of by XRD indicated that the doping of x = 0.25 ratio nano-sized SnO 2 to the strontium sites improved the formation of the Bi-2212 high-temperature superconducting phase. SEM micrographs showed that the morphological structure of all samples consisted of plate-like grains, which were separated from each other by grain boundaries, indicating the Bi-2212 superconducting phase. The highest superconductivity transition temperature among the samples was measured as the T c onset = 86 K at x = 0.25 in Bi 2 Sr 2- x (Sn) x Ca 1 Cu 1.75 Na 0.25 O y . M–H loops of the Bi 2 Sr 2- x (Sn) x Ca 1 Cu 1.75 Na 0.25 O y sample at x = 0.25 ratio is larger compared to other examples, indicating improvement intergrain connectivity as well as enhanced flux pinning centers. In addition, the critical current ( J c ) values of the samples were calculated from M–H measurement using Bean's critical current model. The best J c values were obtained as 570 A/cm 2 at 15 K, which is a relatively high value for BSCCO superconductors with polycrystalline structure.

Process Optimization and Characterization of Bi2Sr2CaCu2O8+δ Powder by Pechini Method

Synthesis of (Bi,Pb)-2223 superconductor powder by pechini method

The reaction process of the Bi-Sr-Ca-Cu-O system and the forming mechanism of the 2212 superconducting phase

Optimization of a New Modified Wet-Chemistry Process for the Synthesis of BPSCCO Superconductor Precursor Powders with Specific Stoichiometr

Preparation of Bi-Based Superconductor Precursor Powder by a Spray- Dry+ Fluidized Bed Denitration Technology

Improving phase transformation and superconducting performance of Bi-2223 tapes via Cu addition

Paraconductivity in Bi 1 . 6 Pb 0 . 4 Sr 2 Ca 2 Cu 3 O 10 + δ superconductors doped with Sm 2 O 3 nanoparticles

Study on Phase-Formation Mechanism and Intergrowth for Bi(Pb)-Sr-Ca-Cu-O System

Synthesis, characterization and electrical properties of hybrid mono-iron-substituted undecatungstosilicate/(Bi,Pb)-2223 phase superconductors

The influences of powder processing variables on the properties of Bi-2223/Ag tapes

Synthesis and characterization of Bi2Sr2CaCu2O8 ceramics prepared in presence of sodium

Study of Effect of PbO Addition in Bi2Sr2LaxCa1 − xCu2O8+δ Ceramics

PREPARATION OF Bi2Sr2Ca1Cu2Ox SUPERCONDUCTING FILMS ON Ag WIRES BY DIP-COATING METHOD

Synthesis and Characterization of Pr_(0.6-x)Nd_xCa_(0.4)FeO_(3-δ) with Pechini Method

Calcination and Phase Composition of BSCCO High Temperature Superconducting Powder

Improvement in electrical properties of Bi-2212 superconducting materials substituted with large-scale nano-sized tin

Formation Mechanism of the 3321 Phase in Bi-System High Temperature Superconduting Materials

Preparation Of Underdoped Bi2sr2ca2cu3o10+Delta Single Crystals

Preparation of 110k Superconductor in Bi-Sr-Ca-Cu-O System

Performance Evaluation Of(bi,pb)2sr2ca2cu3ox Superconducting Precursor Powder by Analysis of Oxygen Partial Pressure

Evolution of Incommensurate Superstructure and Electronic Structure with Pb Substitution in (Bi$_{2-x}$Pb$_{x}$)Sr$_2$CaCu$_2$O$_{8+δ}$ Superconductors