Abstract:A novel process of synthesizing the Bi-based 2212 phase high-temperature superconductor precursor composite powder was developed. The process proposed is consisted of three preparation steps as follows. Firstly, mixed nitrate solution with nominal composition Bi:Pb:Sr:Ca:Cu = 1.84:0.34:1.91:2.03:3.06 was spray-dried to form composite nitrate powder (blue powder). During which, according to the concentration of Bi3+ in the mixed solution, the mixed nitrate solution with concentration of 0.34mol Bi3+L-1 and the inlet and outlet gas temperatures of 563 and 413 K respectively were used for the spray-dry process. Secondly, the brown powder of metal oxide was prepared by denitration of the composite nitrate powder in a fluidized-bed reactor at 700℃, and it is shown that the denitration is a diffusion-controlled process. Finally, the oxide was calcined at 800℃ for 48 h to get black powder. The optimum operation conditions of the above three preparation steps were studied. The morphology, particle size, crystal structure and the phase compositions of powders in different steps were characterized by size analyzer, SEM, and XRD techniques separately. The formation of 2212 phase from amorphous-like phase during the preparation process was exhibited by SEM images and XRD patterns. Results indicate that the obtained black powder shows apparent plate-like crystal structure mainly containing 2212 phase, and it satisfies the requirement of the Bi-based superconductor precursor powder.

Optimization of a New Modified Wet-Chemistry Process for the Synthesis of BPSCCO Superconductor Precursor Powders with Specific Stoichiometr

Synthesis of (Bi,Pb)-2223 superconductor powder by pechini method

Preparation of Bi-Based Superconductor Precursor Powder by a Spray- Dry+ Fluidized Bed Denitration Technology

Preparation and Superconductivity of Bi3PbCa3Sr3Cu4Oy

Preparation and Properties of Perovskite La1-xSrxCoO3-delta Powders and Ag-LSCO Electrical Contact Composite Materials

Preparation of Ultrafine Powder of the Ba-Y-Cu-O System and Its Superconductivity

Performance Evaluation Of(bi,pb)2sr2ca2cu3ox Superconducting Precursor Powder by Analysis of Oxygen Partial Pressure

Study On Bi(Pb, Sb)Srcacuo Superconductors Prepared By The Oxalate Coprecipitation Technique

Enhancement of Pinning Role by Nonstoichiometry in YBa2Cu3O7−y Superconductors

Calcination and Phase Composition of BSCCO High Temperature Superconducting Powder

Preparation of 110k Superconductor in Bi-Sr-Ca-Cu-O System

Preparation and Superconductivity of the High-Tc Phase of Pb-doped Bi-Sr-Ca-Cu-O Superconductor

Synthesis, characterization and electrical properties of hybrid mono-iron-substituted undecatungstosilicate/(Bi,Pb)-2223 phase superconductors

Cation-stoichiometry of Functional Oxides Modified by Oxygen Vacancy Through Growth Kinetics Control

A combined method for synthesis of superconducting Cu doped Bi2Se3

Enhancing the Superconducting Performance of YBa2Cu3O7−δ Bulks with Nano-Sized and Well Distributed Y2BaCuO5 Particles

Influence of Pb Addition on the Structure and Critical Current Density of MOD-YBCO Superconducting Thin Films

Property Improvement of 600-Nm-thick YBCO Superconducting Films Fabricated Using a Pb-Modified MOD Method

The influences of powder processing variables on the properties of Bi-2223/Ag tapes

Improving phase transformation and superconducting performance of Bi-2223 tapes via Cu addition

The Properties of Bi-2223 Precursor Powders Ground by Fluid Energy Comminuting