Abstract:A new high efficient and non-destructive mental activation process of electroless composite plating was proposed. The process utilized electromagnetic induction equipment to heat the titanium alloy substrate and used its energy to complete the activation process, which could successfully attach the nickel nanoparticles firmly to the surface of the titanium alloy; at the same time, the process pre-activated Al2O3 nanoparticles and added the activated nanoparticles to the plating solution. In the process of plating, the activated titanium substrate was used as the catalytic center of electroless nickel plating (ENP) for electroless composite plating. The new activation process avoided complicated traditional processes such as acid etching and zinc dipping. Such traditional processes require huge doses of chemicals, including various strong acids, so improper waste liquid treatment will cause harm to the environment. The important parameters of the process were optimized by orthogonal experiments. A scanning electron microscope (SEM), an X-ray photoelectron spectroscopy (XPS), an energy dispersive spectrometer (EDS), thermal shock experiments and friction and wear experiments were used to characterize and analyze the surface morphology, composition, binding force and friction coefficient of the coating, and analyze the coating quality by measuring the plating rate and the thickness of the coating. The results showed that the rate of electroless composite plating increased with the increase in Al2O3 nanoparticle concentration. When the concentration of Al2O3 nanoparticles reached 1.5 g/L, the ENP rate decreased with the increase in Al2O3 nanoparticle concentration. The adhesion of the sample was evaluated by the scratch test, which showed that the binding grade of the sample was 0, and the Vickers hardness was 688.5 HV. Results showed that the coating produced by this new process has excellent performance. Therefore, the process is an environmentally friendly and fast activation composite plating process.

Preparation of Electroless Ni-P-nano TiO2 Composite Plating

Composite Electroless Nickel-nano Al2O3 Coatings on Steel Substrate

High Hardness and Wear Resistance Electroless Ni-P Deposits Without Heat Treatment

Influence on (Ni-P) Electroless Composite Plating with Carbon Nanotubes

Preparation and Tribological Properties of the Carbon Nanotubes–ni–p Composite Coating

Preparation and characterisation of the Ni-C composite coating electrodeposited with carbon sol

Study on Ni-P-nanoTiN Electroless Composite Coating

The Electrodeposition of Nanostructured Ni-TiN Composite Films

Effect of Pulse Electrodeposition Mode on Microstructures and Properties of Ni-TiN Composite Coatings

A New Process for Efficient Non-Destructive Metal-Activated Composite Plating of Ni-P-Al2O3 on Titanium Base and Its Performance Research

Technology for Ni-Al2O3 Composite Coating and Its Properties

Preparation and Characterization of Nanostructured Ni-TiN Composite Films

SYNTHESIS AND THE PERFORMANCE OF CARBON NANOTUBES-(Ni-P) COMPOSITES

Effects of Direct and Pulse Plating on the Co-Deposition of Sn–Ni/TiO2 Composite Coatings

Preparation and properties of Ni-W-P-TiO2 nanocomposite coatings developed by a sol-enhanced electroplating method

Influence of Electrodeposition Process Parameters and Si3N4 Nanoparticle Concentration on Microhardness and Wettability of Ni-Co-Si3N4 Nanocomposite Coatings

Preparation of Ni-TiO2 Composite Coatings on Q390E Steel by Pulse Electrodeposition and their Photocatalytic and Corrosion Resistance Properties

CHEMICAL PLATING MECHANISM IN ACID BATHS AND FABRICATION OF Ni-P COATING WITH HIGH P CONTENT

Electrodeposition and Corrosion Behavior of Nanostructured Ni-Tin Composite Films

Study of properties of Ni-base nano-ZrO2 composite plating coatings

A Method for Electroless Nickel Plating on Aluminum Alloy Surface