Abstract:Carbon nanotube/continuous carbon fiber reinforced poly(ethylene terephthalate) (CNT/CCF/PET) composites are prepared by melt impregnating. The effects of CF and CNT content on the mechanical properties, melt and crystallization behaviors, and submicroscopic morphology of CNT/CCF/PET composites are studied. The tensile test results show that the increase of CF and the addition of appropriate amount of CNT improved the tensile strength and tensile modulus of the composites. When the content of CNT is 1.0 wt% and the content of CF is 56 wt%, the properties of the composites are the best, with tensile strength of 1728.7 MPa and tensile modulus of 25.1 GPa, which is much higher than that of traditional resin matrix composites. The results of dynamic mechanical analysis (DMA) show that the storage modulus of the composites increased with the increase of CF and CNT content. In particular, the addition of CNT greatly reduced the loss modulus of the composites. Morphological analysis show that the addition of CNT improved the fiber–matrix interface of the composite, which changes from fiber pull-out and fracture failure to fiber matrix fracture failure, and the fiber matrix interface is firmly bonded. In addition, there are polymer coated CNT protrusions on the surface of the fiber was observed. The results of differential scanning calorimetry (DSC) show that the melting temperature and crystallization temperature of the composites increased with the increase of CF content. The addition of CNT had little effect on the melting temperature of the composites, but it further improved the crystallization temperature of the composites. The effect of CNT content on the crystallization kinetics of the composites is studied. The non-isothermal crystallization kinetics of the composites is described by Jeziorny's improved Avrami equation. The results show that CNT has a great influence on the crystallization type of the composites. As a nucleating agent, CNT has obvious heterogeneous nucleation effect in the composites, which improves the crystallization rate of PET.

Study of Property of Nano-meter BaSO4 Reinforced PET Composite

Abs/蒙脱土纳米复合材料的制备、结构及性能

Study on Properties of Modified Bamboo Fiber Reinforced Polypropylene Composites

Preparation and Crystalline Properties of PET/ZnO Nano-meter Composite

Molecular dynamics simulation and experimental study on the mechanical properties of PET nanocomposites filled with CaCO 3 , SiO 2 , and POE- g -GMA

Influence of Preparation Method on Property of ACS/Sb2O3 Composite

Effect of Barium Sulfate Nanoparticles on Mechanical Properties and Crystallization Behaviour of Hdpe

STUDY ON TOUGHENING OF PA6/POE-g-MAH/NANO BaSO_4 BLENDS

Preparation And Properties Of Polylactide/Poly(Ethylene-Co-Octene)/Nano-Sio2 Ternary Composites

Study of Property of Long Glass Fiber Reinforced PET Engineering Plastics

Study of Property of Nano-ZnO/PP and ZnO/CaCO3/PP Composites

Mechanical Properties, Melting and Crystallization Behaviors, and Morphology of Carbon Nanotubes/Continuous Carbon Fiber Reinforced Polyethylene Terephthalate Composites

Effect of Oleic Acid-modified Nano-CaCO3 on the Crystallization Behavior and Mechanical Properties of Polypropylene

Influences of Nano-Si02 on Property of PPO/BCE Composites

Study on the Preparation and Properties of Caco3/Polypropylene Composite Materials

Microstructure and Properties of Poly(butylene Terephthalate)/poly(ethylene Terephthalate) Composites Based on Carbon Nanotubes/graphene Nanoplatelets Hybrid Filler Systems

Study of Structure and Property of PBT/Carbon Nano-tubes Composite

Effect of Nano-BaSO_4 on Color Properties of High Concentration Polyolefine Masterbatch

Non-isothermal Crystallization Kinetics and Rheological Behaviors of PBT/PET Blends: Effects of PET Property and Nano-Silica Content

Reinforcement of Polylactic Acid for Fused Deposition Modeling Process with Nano Particles Treated Bamboo Powder

Preparation and Characterization of Exfoliated Poly（ethyleneterephthalate）/Montmorillonite Nanocomposites Using Modified MMTs with Variable Content of Antimony Acetate