Abstract:This work investigated the mechanical properties of polyethylene terephthalate (PET) reinforced with calcium carbonate (CaCO 3 ) and silica (SiO 2 ) nanoparticles, respectively, and the improvement in toughness of the ternary system with the incorporation of graft-modified ethylene-1-octene copolymer (POE-g-GMA). PET nanocomposites were prepared by melt blending extrusion and injection molding. Molecular dynamics (MD) simulation was employed to construct models for binary system filled with nanoparticles and ternary system with the additional inclusion of POE-g-GMA elastomers. The results of mechanical property tests and MD simulation revealed that the binary system exhibited increased elastic modulus and tensile strength, mainly attributed to the effective reinforcement of rigid nanoparticles and the surface adsorption between nanoparticles and the PET matrix enhanced the interfacial interactions. CaCO 3 indicated a more pronounced reinforcing effect, possibly due to the higher crystallinity of its composites. The incorporation of POE-g-GMA resulted in a significant improvement in impact strength and the elongation at break of PET nanocomposites. This enhancement in toughness is attributed to the elastomer's ability to absorb a substantial amount of impact energy, while the elastic modulus is higher than that of pure PET.

What problem does this paper attempt to address?

This paper aims to solve the problem of improving the mechanical properties of polyethylene terephthalate (PET) nanocomposites. Specifically, the research enhances the mechanical properties of PET by adding two types of nanofillers - calcium carbonate (CaCO₃) and silica (SiO₂), and introducing graft - modified ethylene - 1 - octene copolymer (POE - g - GMA). The research objectives are: 1. **Improve the mechanical properties of PET**: By adding CaCO₃ and SiO₂ nanoparticles, improve the mechanical properties of PET such as elastic modulus and tensile strength. 2. **Improve the toughness of PET**: By introducing POE - g - GMA, increase the impact strength and elongation at break of PET nanocomposites, thereby achieving the transition from brittleness to toughness. 3. **Explore the reinforcement mechanism**: Combine experimental methods and molecular dynamics (MD) simulations to analyze the influence mechanism of nanoparticles and elastomers on the mechanical properties of PET. ### Main research contents: - **Experimental method**: Prepare PET nanocomposites by melt extrusion and injection molding, and conduct mechanical property tests. - **Molecular dynamics simulation**: Construct models of binary systems (PET/CaCO₃ and PET/SiO₂) and ternary systems (PET/POE - g - GMA/CaCO₃ and PET/POE - g - GMA/SiO₂) to simulate the distribution and interaction of nanoparticles and elastomers in the PET matrix. - **Performance analysis**: Analyze the crystallization behavior, morphology and mechanical properties of nanocomposites by means of DSC, XRD, TEM, SEM, etc. ### Research results: - **Binary system**: After adding CaCO₃ and SiO₂ nanoparticles, the elastic modulus and tensile strength of PET are significantly improved. Especially, the effect of CaCO₃ is more obvious, with the maximum tensile strength reaching 55.1 MPa and the maximum elastic modulus reaching 2.51 GPa. - **Ternary system**: After introducing POE - g - GMA, the impact strength and elongation at break of PET nanocomposites are significantly increased, reaching 29.3% and 6.3 kJ·m⁻² respectively, but the tensile strength slightly decreases. This indicates that POE - g - GMA can absorb a large amount of impact energy and reduce stress concentration, thereby improving the toughness of the material. ### Conclusion: By adding CaCO₃ and SiO₂ nanoparticles, the mechanical properties of PET can be significantly improved, and the introduction of POE - g - GMA further improves the toughness of PET nanocomposites, achieving a balance between strength and toughness. These research results provide important theoretical and experimental bases for the development of high - performance PET nanocomposites.

Molecular dynamics simulation and experimental study on the mechanical properties of PET nanocomposites filled with CaCO 3 , SiO 2 , and POE- g -GMA

Effective Enhancement of a Carbon Nanothread on the Mechanical Properties of the Polyethylene Nanocomposite

In-situ Synthesis, Thermal and Mechanical Properties of Biobased Poly(ethylene 2,5-Furandicarboxylate)/montmorillonite (PEF/MMT) Nanocomposites

Application of Macromolecular Chain Extender and Contribution to the Toughening of Poly(Ethylene Terephthalate)

Preparation And Properties Of Polylactide/Poly(Ethylene-Co-Octene)/Nano-Sio2 Ternary Composites

Polyethylene/maleic Anhydride Grafted Polyethylene/organic‐montmorillonite Nanocomposites. I. Preparation, Microstructure, and Mechanical Properties

Toughening of Poly(ethylene Terephthalate) and Optimizing of the Compatibilization Between PET and EPDM by Functionalized EPDM

Preparation and Properties of Poly(Ethylene Terephthalate)/Poly(Butylene Terephthalate) Alloys with High Toughness

Exploring the Effects of Nano-CaCO3 on the Core–Shell Structure and Properties of HDPE/POE/Nano-CaCO3 Ternary Nanocomposites

Preparation of Poly(Phenylene Oxide)/Polyamide-6 Nanocomposites with High Tensile Strength and Excellent Impact Performance

Mutual Nucleating and Crystallization Behavior of Poly (ethylene Terephthalate)/polyamide 66 Blends

Mechanical Properties, Melting and Crystallization Behaviors, and Morphology of Carbon Nanotubes/Continuous Carbon Fiber Reinforced Polyethylene Terephthalate Composites

Fracture behavior and deformation mechanism of polypropylene/ethylene-octene copolymer/magnesium hydroxide ternary phase composites

Micromechanical Dilution of PLA/PETG-Glass/Iron Nanocomposites: A More Efficient Molecular Dynamics Approach

Microstructure and Properties of Poly(butylene Terephthalate)/poly(ethylene Terephthalate) Composites Based on Carbon Nanotubes/graphene Nanoplatelets Hybrid Filler Systems

Remarkable Toughening of Plastic with Monodispersed Nano-CaCO3: From Theoretical Predictions to Experimental Validation

Study of polypropylene/polyethylene terephthalate blends compatibilized with polypropylene double‐grafted maleic anhydride and epoxy resin

Effect of nucleating agent incorporation on the crystallization and mechanical properties of polylactide/polyamide elastomer blends

Experimental investigation on mechanical properties of nanocomposites based on poly lactic acid/ polyolefin elastomer reinforced with multi-walled carbon nanotubes, and graphene nanoplatelets

Design of super-toughened, heat-resistant and antistatic polyethylene terephthalate-based blend composites by constructing a tenacious interface

The Cellular Structure and Mechanical Properties of Polypropylene/Nano-CaCO3/Ethylene-propylene-diene-monomer Composites Prepared by an In-Mold-Decoration/Microcellular-Injection-Molding Process