Abstract:In this work, recycled Poly(ethylene glycol-co-cyclohexane-1,4-dimethanol terephthalate) plastic (PETG) was used to enhance the properties and lower the cost of polypropylene(PP). In order to adjust the interfacial adhesion, three triblock copolymers having the same styrene block at two ends but different block in the middle, were used a the compatibilizers, namely, styrene–ethylene/butylene–styrene (SEBS), styrene–butadiene–styrene (SBS), styrene–isoprene–styrene (SIS). The ratio of PP to PETG was fixed at 70/30 and the relationship between interfacial adhesion and mechanical properties was investigated. The addition of SIS caused a considerable increase in Izod impact toughness, but only slightly improved toughness was observed for blends compatibilized with SEBS. The effect of SBS on improving the impact toughness lied in between that of SIS and SEBS. SEM micrographs showed that PETG forms a fibrillar-like structure for all the uncompatibilized and compatibilized blends, and the blends compatibilized with SBS have smallest domain size, the blends compatibilized with SEBS have largest domain size, while the ones compatibilized with SIS show a moderate domain size. Results from melt rheometry and SEM observation together with work of interfacial adhesion, indicated a strongest interfacial adhesion in blends compatibilized with SBS, poorest in blends compatibilized with SEBS, and moderate in blends compatibilized with SIS. It is very interesting to found that the much improved impact strength was not observed in the blends with the strongest interfacial adhesion but achieved in the blend with moderate interfacial adhesion. Investigation on the impact fractured surface revealed an easier debonding of fibril from matrix and consequently drawn out of matrix in blends compatibilized by SIS with moderate interfacial adhesion, which was considered as the main reason for the much improved impact toughness in this system.

Study of polypropylene/polyethylene terephthalate blends compatibilized with polypropylene double‐grafted maleic anhydride and epoxy resin

Combination of double-modified clay and polypropylene-graft-maleic anhydride for the simultaneously improved thermal and mechanical properties of polypropylene

Mechanical properties of compatibilized polypropylene/recycled poly(ethylene terephthalate) blends

Reactive Compatibilization and Properties of Recycled Poly(Ethylene Terephthalate)/Poly(Ethylene-Octene) Blends

Mechanical Properties of R-Pet/pp Blends Compatibilized By#br#pp-G-ma and Its Mixture

Reinforcement of Recycled PET for Mechanical Properties of Isotactic Polypropylene

Linear Low‐density Polyethylene/poly(ethylene Terephthalate) Blends Compatibilization Prepared by an Eccentric Rotor Extruder: A Morphology, Mechanical, Thermal, and Rheological Study

In Situ Reactive Interfacial Compatibilization of Poly(Ethylene Terephthalate)/Metallocene Polyethylene Blends

Structure and Properties of Compatibilized Recycled Poly(ethylene Terephthalate)/linear Low Density Polyethylene Blends

Fabrication of poly(ethylene terephthalate)/polypropylene-based elastomer blends with balanced stiffness-toughness: The effect of reactive compatibilization

Structure and Properties of PLA/PETG Blends Compatibilized by PLA-g-MAH

Non-Isothermal Crystallization and Melting Behavior of Compatibilized Polypropylene/Recycled Poly(Ethylene Terephthalate) Blends

Compatibilization of Polypropylene/recycled Polyethylene Terephthalate Blends with Maleic Anhydride Grafted Polypropylene in the Presence of Diallyl Phthalate

Compatibility and Toughening Mechanism of Poly(ethylene Terephthalate)/polycarbonate Blends

Effect of Poly(Acrylic Acid)-Modified Poly(Ethylene Terephthalate) on Improving the Integrated Mechanical Properties of Poly(Ethylene Terephthalate)/Elastomer Blend

Effects of Compatibilizers on Properties of LLDPE/PET Blends

Study on the Non-isothermal and Melting Behaviors of Compatibilized PP/recycled PET Blends

Unlocking superior properties in polypropylene/polyethylene terephthalate (PP/PET) blends using an ethylene-butylene-acrylate terpolymer reactive compatibilizer

Pan-Milling Preparation of Polypropylene- graft -Maleic Anhydride and Its Compatibilizing Effect on Polyamide 6/Polypropylene Blend

Morphology and properties of PP/PC blends compatibilized with E-MA-GMA

The effect of interfacial adhesion on the impact strength of immiscible PP/PETG blends compatibilized with triblock copolymers