Abstract:Metal matrix diamond composites (MMDC) started from the pre-alloyed powders with the addition of different concentration of Ti3AlC2 MAX phase were prepared via microwave assisted sintering (MAS) method. The microstructure of samples was examined by SEM, EDS and XRD characterization methods. The mechanical properties including relative density, abrasive ratio, impact toughness, hardness, elastic modulus and bending strength were also analyzed to investigate the contribution of the additive of Ti3AlC2. The results demonstrate that Ti3AlC2 additive is beneficial for promoting the mechanical properties and the optimized Ti3AlC2 addition concentration is 25 wt %. The enhancement effect of the comprehensive mechanical properties could be due to the in-situ decomposition of Ti3AlC2 induced by diamond and the generated Al to stuff porosity and then conducive to densification of the sintered structure. Simultaneously, Al element reacts with diamond abrasive to produce Al4C3 transition layer on the diamond surface, which improves the bonding force between the diamond and the matrix for the MMDC sample. The advantages of microwave heating and the pre-alloying of raw powder can avoid the graphitization behavior of internal diamond abrasive owning to the relatively low sintering temperature. The potential sintering mechanism of the pre-alloyed diamond composites by the addition of Ti3AlC2 in the microwave field was also discussed.

Preparation of New Al Based Complex Bonded Diamond Composite

High pressure sintering behavior and mechanical properties of cBN-Ti 3Al and cBN-Ti 3Al-Al composite materials

Nanostructured Diamond-Tic Composites with High Fracture Toughness

PREPARATION AND PROPERTIES OF TiB2/TiAl COMPOSITE SHEETS WITH LAYERED STRUCTURE

FLEXURAL STRENGTH OF IN-SITU REACTION PROCESSED Al2O3-Al3Ti-Al COMPOSITES

Fabrication of Cu/TiC Bonded Diamond Composite by Reaction Sintering

Preparation of ti-al based nanophase composite powder by mechanical alloying

Preparation of Ti/Al based nanophase composite powder by mechanical alloying

Preparation and properties of Al2O3/Al-2(1-0.2)Mg0.2Ti(1+0.2)O5 matrix ceramic composite

Preparation and characteristics of Ti3AlC2 -Al3Ti/Al composite materials synthesized from pure Al and Ti3AlC2 powders

Fabrication of Ti2AlC ceramic bonded diamond composites by self-propagation high temperature sintering

Preparation of Diamond/aluminum Composite with Titanium Coating on Diamond Powder by Microwave Technology

Preparation and Characterization of TiB2/Al3Ti/Al2O3 Composite Nano-powder

Synthesis of diamond composites via microwave sintering and the improvement of mechanical properties induced by in-situ decomposition of Ti3AlC2

Microstructure and property of Al/TiC composites prepared by reaction synthesis

Investigation on microstructure and properties of TiC0.5-Al2O3/Cu composites fabricated by a novel in-situ reactive synthesis

Heterogeneous interfacial chemical nature and bonds in a W-coated diamond/Al composite

Reaction synthesis, microstructure, and mechanical properties of in-situ TiAl-based multiphase composites

Preparation of in situ TiC@TiN core–shell and Ti2N–Al4C3 nanoparticles and their effects on Al–Zn–Mg–Cu alloy

In-Situ Preparation of Al/Tial3(P) Composite by Direct Reaction Between Molten Al and Tio2 Powder

Processing of in situ aluminum-matrix composites and controlling of the solidification microstructures