Abstract:Diamond/aluminum composites, as a new generation of thermal management materials, are caught in the dilemma between inhibiting the formation of Al 4 C 3 and improving the performance. Herein, we proposed a strategy for nanoscale multi-interface phase structure engineering, utilizing a combination of magnetron sputtering and vacuum heat treatment to obtain diamond particles with nanoscale TiC-Ti layers. Prolonging the vacuum heating time increases the content of TiC, but results in significant differences in the morphology and coverage of TiC formed on the diamond(100) and (111) facets. First-principles calculations reveal that the work of adhesion and C-Ti reaction tendency of diamond(100)/Ti are stronger than those of diamond(111)/Ti, clarifying the difference in interfacial properties between diamond/Ti and diamond/TiC. Diamond-TiC-Ti configuration obtained in advance contributes to fabricating the composite with diamond-TiC-Al(Al 3 Ti) structure, and the multi-interface phase structure is beneficial to improve the interface bonding, adjust the acoustic mismatch, and inhibit the formation of Al 4 C 3 . (800 °C 0.5h)@Ti-diamond(100 μm)/aluminum composite with the multi-interface phase exhibits excellent thermal conductivity(646 W·m -1 ·K -1 ) and outstanding bending strength(358 MPa), exceeding 90% of the theoretical prediction of the differential effective medium model. The performance of (800 °C 0.5 h)@Ti-coated diamond/aluminum composite is about 30% higher than that of traditional Ti-coated diamond/aluminum composite. The TiC layer formed by increasing the heat treatment time is thicker and discontinuous, leading to a decrease in the thermal conductivity of the composite and a weakening effect of Al 4 C 3 inhibition. We clarified the formation mechanism of interface structure related to diamond orientation by multi-scale characterization. Based on the thermal conductivity prediction models, the interface structures corresponding to different diamond orientations were considered, and the predicted values showed good consistency with the experimental results. By interface modification engineering, we overcome the dilemma of introducing modified layer to inhibit Al-C reaction while leading to additional interface thermal resistance, providing insights into the interfacial thermal transport mechanism.

Preparation of Diamond/aluminum Composite with Titanium Coating on Diamond Powder by Microwave Technology

Preparation of Ti-coated Diamond Particles by Microwave Heating

Synthesis of diamond composites via microwave sintering and the improvement of mechanical properties induced by in-situ decomposition of Ti3AlC2

Preparation of Ti-coated diamond/WC-Co-based cemented carbide composites by microwave-evaporation titanium-plating of diamond particles and microwave hot-press sintering

Improved Bending Strength and Thermal Conductivity of Diamond/Al Composites with Ti Coating Fabricated by Liquid–Solid Separation Method

Tungsten-coated Diamond Powders Prepared by Microwave-Heating Salt-Bath Plating

The role of pre-alloyed powder combined with pressure-less microwave sintering on performance of superhard materials

Achieving high thermal conductivity and strong bending strength diamond/aluminum composite via nanoscale multi-interface phase structure engineering

A Novel Diamond/AlSi Composite Coating on Ti-6Al-4V SubStrate Made by Ultrasonic-Assisted Brazing

Preparation of New Al Based Complex Bonded Diamond Composite

The Microstructure and Wear Properties of Diamond Composite Coatings on TC4 Made by Induction Brazing

Preparation and tribological properties of novel cold–sprayed Ti–diamond composite coating

Interface Characterization of a Cu–Ti-coated Diamond System

Effects of the In Situ Growth of CNTs on Ti-Coated Diamond Surfaces on the Mechanical Properties of Diamond/Aluminum Composites

Diamond particles-reinforced Ni-based composite coating on Ti6Al4V alloy: Microstructure, mechanical, dynamic impact and dry-sliding tribological properties

Microstructure, Microhardness, Fracture Toughness, and Abrasive Wear of In-Situ Synthesized TiC/Ti-Al Composite Coatings by Cold Spraying Combined with Heat Treatment

Fabrication of Ti2AlC ceramic bonded diamond composites by self-propagation high temperature sintering

Enhanced Thermal Conductivity in Diamond/Aluminum Composites with Tungsten Coatings on Diamond Particles Prepared by Magnetron Sputtering Method

Enhanced Stability of the Diamond/Al Composites by W Coatings Prepared by the Magnetron Sputtering Method

Microstructure of Diamond/aluminum Composites Fabricated by Pressureless Metal Infiltration

In-situ TiC/Ti composites based on Ti 2 AlC–Ti system: Reaction process, microstructure, and mechanical properties