Abstract:Core power distribution monitoring in operating power reactors is very important in core surveillance, the 3-D power distribution is one of the basic operation parameters which can determine many other important parameters used to evaluate the operation condition of reactor and the safe margin. Many kinds of on-line monitoring systems, such as BEACON [1] and SCOMS [2], have been developed to estimate in-core power distributions using fixed in-core detectors. In order to get the reliability of the estimated power distribution, the uncertainty analysis procedure of the monitoring system is needed. The uncertainty analysis method [ 1 ] of BEACON system includes a statistical simulation of various core state conditions, power distributions and detector behavior based on the measurement variability. A number of ‘true’ and ‘predicted’ core model pairs are selected to provide the uncertainty analysis with a bounding set of differences that could be encountered between the BEACON core monitor model and plant conditions under normal and off-normal conditions. The uncertainty analysis method used in SCOMS system [2] get the overall uncertainty from the uncertainties of the input parameters. Individual uncertainties of input variables are randomly sampled within the range and then added to the original value. In this study, a new uncertainty analysis method for core power distribution monitoring system SMROMS (Small Modular Reactor On-line Monitoring System) was discussed. SMROMS uses in-core self powered neutron detectors (SPNDs) to monitor the power distribution continuously. This method is different from two methods mentioned above, because the calculation uncertainty and measurement uncertainty are considered separately. A rod controlled small modular reactor developed by Nuclear Power Institute of China, i.e. ACP100-K, was selected as a study case. The 3DCC [3] (3D Coupling Coefficients) power distribution reconstruction method was implemented in SMROMS.

On-line reconstruction of in-core power distribution by harmonics expansion method

On-line Measurement for Power Angle and Circuit Parameter in the Turbo Steam Generator with the FEM Based

Unified Model Based Harmonics and Reactive Current Detection

On-line monitoring the incore power distribution by using excore ion-chambers

The possibility to online reconstruct the htr in-core power distribution

Improved Harmonics Synthesis Method and Its Application in Reconstructing Power Distribution of HTR-PM

Peak-Load-Regulation Nuclear Power Unit Fault Diagnosis Using Thermal Sensors Combined with Improved ICA-RF Algorithm.

Practice and Validation of Harmonic Method for HTR-PM Power Distribution Monitoring

Harmonics synthesis method for core flux distribution reconstruction

Study on the Relationship between Ex-core Detector Readings and In-core Power Distribution

Real-time simulations to enhance distributed on-line monitoring and fault detection in Pressurized Water Reactors

Two spatial statistical algorithms for core power distribution reconstruction

Use readings of thermocouples to reconstruct the power distribution of HTR-PM

Research of core power distribution reconstruction method based on cross section deviation

Application of new axial power distribution synthesis method using in-core detector signal in digital core protection system

Uncertainty Analysis of Core Power Distribution Monitoring System SMROMS

A NEW METHOD FOR REAL-TIME DETECTING HARMONICS AND REACTIVE CURRENTS IN SINGLE-PHASE CIRCUIT

A simulation study of the ability to detect power distribution perturbations in the texas A&M TRIGA reactor with self-powered neutron detectors

A Hybrid Data Assimilation and Dynamic Mode Decomposition Approach for Xenon Dynamic Prediction of Nuclear Reactor Cores

PWR core calculation based on pin-cell homogenization in three-dimensional pin-by-pin geometry

Mode decomposition of core dynamics transients using higher-order DMD method